MY KZ1000 Superbike Seat

Bottom seat is old cafe' style
middle is the new ZRX style seat - solo with hump
top is ZRX style with hump same place as LTD

comparison of seats - just laying on top of bikes

getting crowded...

details on blue/white bike please!

looks like you have a serious problem on your hands i think i know someone that can help i have an extra enclosed trailer that normally hauls my drag bikes but i can certainly make an exception for you in this case. just trying to help you out brother.

Plummen - I bought that for parts - and have not had a chance to open it... This is what I know:
- Running a "C" frame - police bike
- FZR 1000 front end - forks, triple, 17" wheel - probably brakes
- FZR swing arm with dual shock and 180 17" FZR wheel
- Z1 engine with big block (unknown size)
- Mikuni RS carbs - probably 36mm
- Supposedly... undercut trans (kicker removed), P&P head, cams...
- Hydro clutch
- Outer bearing support
- Corbin seat
- Pingel petcock
- oil cooler

Lots of CNC parts - the builder definitely had the use of a CNC. Oil Coller mount, rear set adapter, rear master cylinder mount... all custom fab.

My guess it was built as a strip bike. due to the front end swap, it turn like a ton of brick.

The bike runs STRONG! showed up with really badly tuned carbs... just a little fiddling allowed the bike to start quickly and idle fine. Small oil leak on big block, but the head was not torqued properly while I was thrashing it to "determine" if the engine was good.

I'm having the head pulled and inspected and re-sealed, so I can determine what's inside and what condition it really is.

timebomb33 - thanks for the offer.. but I'm managing

one frame is out at coater and one more to go after I fit the GSXR swingarm. The one frame to sell (a G model clasic), then I'll have 5 running bikes and an extra engine.

Funny - my wife allows me to acquire bikes - since it has proven to steal all my free time, before it was spent on... did I mention I did photography

well i don't know if you know but big blocks can be a bit persnicity so when ever you change your mind my offer is open, by the way mighty nice fleet you have sir. there is something mighty cool about that white big block bike tho.i'm thinking that bike deserves a fate better than a parts bike don't you

It was bought unseen for the right price - once it showed up and I rode it... I was convinced it just needs some TLC. I hope the insides are reasonably healthy:unsure:

OH, the one thing that is bad - the started clutch, but I acquired one and will undertake that AFTER the inspection.

hey is there anyway you could e-mail me a picture of the white bike from a couple of different angles i really like the look of it my e-mail is tryerson@nait.ca that would be cool if you could. i likey long time

I sent you some images. Full size no touch ups.

There are 2 images here - but the info is wrong it is NOT a zx swingarm, but an FZR1000.

LINK

This is the same arm used on the AutoMagic bike which happens to be the theme behind my big project.

my god that bike is fantastic that is so much like i want to build it is incredible cunning little fellows those japenese,fantastic craftsmen