Identifying my carbs

More
30 Jul 2013 13:50 #599080 by yarrg
Identifying my carbs was created by yarrg
So I'm trying to ID my carbs on the 82 1100 thats in my profile pic. The PO had swapped the carbs out when he was trying to get it in running condition. The only thing I know for sure is they are mikuni (the name branded onto the metal was a dead giveaway). At a glance I didn't see any identifying numbers or anything like that. What should I be looking for? I'll post some pics up when I get off work to help with the identifying process.

Please Log in or Create an account to join the conversation.

More
30 Jul 2013 14:05 #599084 by koolaid_kid
Replied by koolaid_kid on topic Identifying my carbs
Do you have a metric caliper so you can measure throat sizes?

1983 GPz 750
810 Wiseco, Kerker, K&N, DynoJet S3, Accel, Progressive, etc.

Please Log in or Create an account to join the conversation.

More
30 Jul 2013 15:32 #599093 by yarrg
Replied by yarrg on topic Identifying my carbs
Unfortunately I do not.

Please Log in or Create an account to join the conversation.

More
30 Jul 2013 21:51 #599125 by Haybus
Replied by Haybus on topic Identifying my carbs
Do you have a non metric caliper and a calculator? 1"=25.4mm

Alan

1976 KZ900 LTD (sort of)
2005 FJR
2009 Hayabusa
www.kzrider.com/forum/11-projects/557845...-streetfighter-build

Please Log in or Create an account to join the conversation.

More
31 Jul 2013 06:09 #599182 by uncle nick
Replied by uncle nick on topic Identifying my carbs
Have you looked in the Filebase section of this site?
On Page 3 of the non model specific section there's a guide to Mikuni carbs.
Yours may be later than those on the guide but it's a start until you get some photos up.

1981 KZ650 CSR
The following user(s) said Thank You: yarrg

Please Log in or Create an account to join the conversation.

More
31 Jul 2013 08:05 #599186 by yarrg
Replied by yarrg on topic Identifying my carbs
Haybus - I don't have a set of calipers at all.

Nick - Thanks, I'll check that section out.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum