Installing a fuel T-joint

I just bought a new fuel joint and I am having trouble fitting it in without taking the individual carbs off themselves so I can slip it in easier. If anyone has a diagram or can walk me through the carb disassemble steps that would be greatly appreciated.

what kind of bike?

Including information about bike year and model is helpful to viewers and usually elicits better responses.
It's easy to put the information in your signature where it shows in all posted messages, past and future.
And may be changed whenever and as often as desired.
If wanting a signature showing information about the bike in posted messages, it's easy to do. Here's how:





Good Fortune!

alittle lube on o-rings wont hurt for installing you need to split carbs

Carburetor forum, topic: Looking for a fuel T joint

godsturd wrote: Looked everywhere for a fuel t joint that will fit a 77' 650c, can't find one online anywhere.
Any suggestions on a good place to look?

Good Fortune!

Sorry spaced the bike info. It's a 77 kz650c.

I recommend you pull apart the carbs. The risk of damaging or tearing an o-ring outweighs the reward of saving 20 minutes.

Patton wrote: Carburetor forum, topic: Looking for a fuel T joint

godsturd wrote: Looked everywhere for a fuel t joint that will fit a 77' 650c, can't find one online anywhere.
Any suggestions on a good place to look?

Good Fortune!

Patton you are the man i like your way of doing things (your good)

Here's a parts diagram:
Click > www.bikebandit.com/houseofmotorcycles/19.../o/m150657#sch703882

Perhaps the B1 carbs (see FSM) are similar:
docs.google.com/file/d/0B0LxNUBYfNL8ZTQ2...mZTdkODdh/edit?pli=1

(See page 43, Separation of Carburetors)

Good Fortune!

From the FSM link in previous post:














Good Fortune!