full throttle bog

so my #2 cylinder secondary main jet seems to be bent not the jet itself, but the device that it screws into. it is causing the slide to malfunction.

went out to start the bike yesterday and gas just started pouring out of the #3 overflow tube. turns out the slide on the #2 wasn't working the needle was stuck i am really pissed because i lost about a half of a gallon of gas. :pinch:

Got the petcock vacuum hose on the #1 carburetor, it is a clear hose so i can see what is going on in there. I noticed as it is getting warmed up it usually pops a little as i have the choke mostly off. a few nights ago i noticed there was a light emitting inside that hose right as i was about to take off. i don't know if i need a valve adjustment, or a re-jet or both.

donthaveakawman wrote: bike rides nice but it bogs out at full throttle 3/4 throttle is great. i disassembled the jets and cleaned them with marvel mystery oil along with all the other parts. i found some used pipes 4-1 sounds great i think the cleaner i used is causing the slides to stick or maybe the main jets are gummed up.

Attachment carbs.jpg not found

Attachment kerker.JPG not found

<any idea as to what kind of pipe this exhaust is?

i have a few parts from a jynojet kit that a friend gave me to hold on to and now he owes me money :evil: . it is a dj2102 kit the jets in there are the dj122 and the dj116 jets there are 4 of each, if anyone needs these i might be able to get them on ebay. those are for the spectre model.

he didn't need them because the package says for racing use only.

any questions?