KZ650F3 1982 UK model

More
10 Aug 2012 16:44 #541788 by captinyzf
KZ650F3 1982 UK model was created by captinyzf
Quick couple of questions...

Can anyone tell me the size of the air intake jet on this model? These are the ones that screw in to the intake side of the carbs. Neither my Haynes,Clymer or any download I have found even mention these!


Attachment IMAG0332.jpg not found




Also, whilst I'm ordering jets, any (rough obviously) recommendations on main/pilot sizes for one of these running pod filters. Nearly all pilot jets have been mullered by previous owners so need to replace anyway.

Obviously from the pic, there is no rush! :lol:


Attachment IMAG0334.jpg not found

Attachments:

Please Log in or Create an account to join the conversation.

More
12 Aug 2012 15:41 #542114 by captinyzf
Replied by captinyzf on topic KZ650F3 1982 UK model
Bump! Anyone? :(

Please Log in or Create an account to join the conversation.

More
12 Aug 2012 16:52 #542127 by Patton
Replied by Patton on topic KZ650F3 1982 UK model
If look long enough and hard enough, may find it here:

www.sudco.com/

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
12 Aug 2012 20:58 #542164 by rstnick
Replied by rstnick on topic KZ650F3 1982 UK model
Look in the carb section here too:
forums.kz650.info/index.php?board=4.0

Bruce/gd4now could probably put you in the right ballpark as far as jetting.
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links