#2 carb nylon vacuum piston really tight

More
24 Aug 2011 12:09 #471442 by garyprather
Replied by garyprather on topic #2 carb nylon vacuum piston really tight
ok, I moved the clip to the 3rd groove from the bottom. I answered my own question here because the mixture screws are now about 2.5 turns out and seems to run well at this setting. Thanks for your help guys.

Please Log in or Create an account to join the conversation.

More
24 Aug 2011 15:20 #471473 by garyprather
Replied by garyprather on topic #2 carb nylon vacuum piston really tight
At first idle after moving the needle up and screws set to 2.5 roughly turns out the bike seem to idle good, but now the acceleration from idle to cranking it is really sluggish. I am going to move it back to the settings I had. I double checked for intake leaks and still none found.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum