- Posts: 50
- Thank you received: 1
Bringing a '78 KZ200 Back to Life
- twerth
- Topic Author
- Offline
- User
Less
More
05 Jul 2011 10:08 #461111
by twerth
1981 Kawasaki KZ650
2006 Ducati ST3s
1979 Honda GL1000 Goldwing
Bringing a '78 KZ200 Back to Life was created by twerth
Hello. I just received this bike in trade for some work and paint on a friend's bike. The KZ had been sitting in his garage since 1992, but had allegedly been in running condition when he parked it. After an afternoon of cleaning sludge and varnish out of the tank and carb, it started on the first try (push start, still needs a battery). Absolutely amazing! This bike has been sitting for nearly 20 years and is still ready to run. I'll post some pictures once I get them downloaded from my camera.
So here is my question/request to the forum. I need to get my hands on a service manual, but I'd rather not spend $30 for the e-bay hard copies. Does anyone have a PDF copy they'd make available for a reasonable price? At a minimum, I need to get the carb adjustment settings so I can get this baby running a little better. Any help is appreciated. Thanks.
So here is my question/request to the forum. I need to get my hands on a service manual, but I'd rather not spend $30 for the e-bay hard copies. Does anyone have a PDF copy they'd make available for a reasonable price? At a minimum, I need to get the carb adjustment settings so I can get this baby running a little better. Any help is appreciated. Thanks.
1981 Kawasaki KZ650
2006 Ducati ST3s
1979 Honda GL1000 Goldwing
Please Log in or Create an account to join the conversation.
- badrhino
- Offline
- User
Less
More
- Posts: 554
- Thank you received: 6
06 Jul 2011 03:10 #461244
by badrhino
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Replied by badrhino on topic Bringing a '78 KZ200 Back to Life
I would like to know where to get one myself for a KZ1000. Thanks!
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Please Log in or Create an account to join the conversation.