- Posts: 86
- Thank you received: 0
Carb Setting
- gremlin497
- Topic Author
- Offline
- User
Less
More
03 May 2010 17:08 #365286
by gremlin497
1977 KZ 1075 (FBG), 29 Smoothbores V&H Mega
Carb Setting was created by gremlin497
Trying to get some work done on bike and both books i have say to turn air screw out 1 1/4 turn. Can someone tell me good starting point for 26's, with fresh 1075 put into motor with stock cams. I also need to have starting point for 29 smoothbores also. I want to get a little work done and before i put 29's on i need to use 26. Please help.
1977 KZ 1075 (FBG), 29 Smoothbores V&H Mega
Please Log in or Create an account to join the conversation.
- TeK9iNe
- Offline
- User
- What did you do!?!
Less
More
- Posts: 2440
- Thank you received: 28
03 May 2010 17:10 #365288
by TeK9iNe
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Replied by TeK9iNe on topic Carb Setting
Try them starting at 1 1/2 turns out.
Doeant really matter where on the screws you start...
Just turn up the idle for now.
It matter where on the screws you end up!
GL.
Doeant really matter where on the screws you start...
Just turn up the idle for now.
It matter where on the screws you end up!
GL.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.