- Posts: 66
- Thank you received: 0
vacum caps
- irish mike
- Topic Author
- Offline
- User
- 79 kz 650 b3 rat rod
Less
More
03 Feb 2010 17:46 #346320
by irish mike
vacum caps was created by irish mike
its a simple [maybe stupid ]question but what size are the vacum cap that go on this bike-mikuni carbs[79 kz 650-i found that part of my problem was my vacum caps were starting to crack -so i went to auto zone and picked up some the same size[i thought] but after the bike warmed it got stuck on high idle -i noticed the caps when the bike gets hot are able to move up and down thus causing my vacum leak-i could always buy a variety pack but would like to know the correct size thanks mike''''
Please Log in or Create an account to join the conversation.
- Patton
- Offline
- KZr Legend
Less
More
- Posts: 18640
- Thank you received: 2098
03 Feb 2010 17:55 #346323
by Patton
1973 Z1
KZ900 LTD
Replied by Patton on topic vacum caps
1973 Z1
KZ900 LTD
Please Log in or Create an account to join the conversation.
- MFolks
- Offline
- User
Less
More
- Posts: 6650
- Thank you received: 540
03 Feb 2010 20:19 #346346
by MFolks
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Replied by MFolks on topic vacum caps
The auto parts store's vinyl caps tend to harden after exposure to the alcohol/gas mix. Rubber is more forgiving but eventually needs replacement too.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- OKC_Kent
- Offline
- User
Less
More
- Posts: 1718
- Thank you received: 20
04 Feb 2010 10:36 #346418
by OKC_Kent
Oklahoma City, OK
78 KZ650 B2 82,000+ miles
Replied by OKC_Kent on topic vacum caps
I think Wiredgeorge once said they were 7/32"
Oklahoma City, OK
78 KZ650 B2 82,000+ miles
Please Log in or Create an account to join the conversation.