pods, 4-1, 1075, what jet size?
- cruspeed
- Topic Author
- Offline
- User
Less
More
27 Oct 2009 00:43 #329881
by cruspeed
78 KZ1000 project X 2
pods, 4-1, 1075, what jet size? was created by cruspeed
I'd like to rejet the carbs before I put them back on the engine and get the bike put back together. I was going to dissasemble them just to give them a good cleaning anyways, like the title states I have k&n pods, 4 to 1 header/exhaust, 1075cc kit and the carbs are the stock size. Experienced input needed for what size jets to start with.
78 KZ1000 project X 2
Please Log in or Create an account to join the conversation.
- TeK9iNe
- Offline
- User
- What did you do!?!
Less
More
- Posts: 2440
- Thank you received: 28
27 Oct 2009 15:01 - 27 Oct 2009 15:02 #329962
by TeK9iNe
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Replied by TeK9iNe on topic pods, 4-1, 1075, what jet size?
What was the previous jetting and mods before changes?
This will help:
Worked good for me several times as a starting point, very close.
Always buy 2-3 sizes larger and smaller for fine tuning. You'll thank yourself later, as it will make this tedious task much quicker!
Cheers n' GL.
This will help:
Attachment Jetting_Guidelines.doc not found
Worked good for me several times as a starting point, very close.
Always buy 2-3 sizes larger and smaller for fine tuning. You'll thank yourself later, as it will make this tedious task much quicker!
Cheers n' GL.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 27 Oct 2009 15:02 by TeK9iNe.
Please Log in or Create an account to join the conversation.