what carbs do i have? has pics now

ok so i buy a (76 kz) bike that is nonrunning infact it is in parts. but i am new to the kz scene thoiugh i am learning fast and thanks for all the help so far.
what do i have? the inlet measurement is close to 32? if i remember right. says mikuni corp. on the sides

Post edited by: School Teacher, at: 2007/11/07 13:03

School Teacher wrote:

ok so i buy a (76 kz) bike that is nonrunning infact it is in parts. but i am new to the kz scene thoiugh i am learning fast and thanks for all the help so far.
what do i have? the inlet measurement is close to 32? if i remember right. says mikuni corp. on the sides<br><br>Post edited by: School Teacher, at: 2007/11/07 13:03

here is the other side

Post edited by: School Teacher, at: 2007/11/07 13:14

and the side

29mm smoothbores? or off of a later kz 1000?????

Post edited by: oldkaws4ever, at: 2007/11/07 14:11

29mm smoothbores?

There're not smooth bores. Those are CV carbs. What they are exactly from is anyones guess.

flatslide Mics. i'd think maybe a zx-10? mid-late 80's. can't really think of a flat-slide air-cool kawi i have seen.

looks like the set of 36's i pulled off a 92 katana a couple weeks ago.

No obvious vacuum ports and cable idle adjust = early 90's ninja type bike application.

WiredGeorge would know exactly.

Post edited by: Kraygh, at: 2007/11/07 16:32

Kraygh wrote:

No obvious vacuum ports and cable idle adjust = early 90's ninja type bike application.

WiredGeorge would know exactly.<br><br>Post edited by: Kraygh, at: 2007/11/07 16:32

well in the second pic the idle is a rod connected to a cable.....

kawsakiman wrote:

looks like the set of 36's i pulled off a 92 katana a couple weeks ago.

Also thinking Suzuki. Also noticing the angle of float bowl connection which would indicate more of a down draft style mounting position.