Just cleaned carbs

Post edited by: vach, at: 2007/05/10 08:50

Here it is. It's very soft. I used at at medium speed. It doesn't damage the metal at all.

sorry, I swear i didn't click it again...

Post edited by: vach, at: 2007/05/10 20:17

F@#$$!!

Post edited by: vach, at: 2007/05/10 20:16

Sorry all, I ran out of lemon juice on the last carb and boiled it in just vinegar. It didn't come out as clean as the others did from the boinling. But, when I hit it with the dremmel, it actually looks even better. The lemon juice etches the metal mor, loosinf=g some of the shine. I would recomend doing this with just vineger.. Sorry again...

Very nice.
How long did you boil the carbs to get these results?

1 HR. a piece or until they came clean. Note, when I cleaned them with just vinegar(which is what I recomend) It still had a small amount of crud that just blew off with carb cleaner. Then the dremmil and whala! Don't use the lemon juice, you don't need it. What cost $15.00 should have cost about $5.00 for just 2 big bottles of vinegar. !/2 a bottle per carb.