Welcome, Guest
Username: Password: Remember me

TOPIC:

Drag strip trip. 07 May 2013 11:08 #586147

  • JEFFG1
  • JEFFG1's Avatar
  • Offline
  • User
  • Posts: 341
  • Thank you received: 16
I HAVE BEEN RUNNING THE 005 ADVANCE WIDTH IS A 200 ON MY STREET BIKE AND IAM NOT EASY ON IT, THE TIRE BITES LIKE A BITCH I HAVE A 190 ON MY DRAG BIKE BOTH WORK VERY WELL . JUST DONT DO A HUGE BURNOUT THEY WILL CHUNK UP
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project

Please Log in or Create an account to join the conversation.

Drag strip trip. 07 May 2013 22:47 #586229

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
I got the 006 podium today and for an intermediate compound
tire it's real soft.
In fact I was looking at a hookup u-soft
at cycle gear last week and I'd say the podium is as soft or
maybe even softer.

Got to order an offset sprocket for the front and I have a spacer for the rear sprocket
to move the chain over about 3/8" then I'll let ya'll know how it work's.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 09 May 2013 00:34 #586500

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Got the Shinko mounted tonight with out having to
move the chain so did a little bar hoppin to heat cycle it a few time's.
I only put about 15 mile's on it but like the way it feels

Now the bad part stopped in a warehouse area that's all concrete
and with an 8000 grand no burn out launch it was all I could do to hold on.

This tire hook's better then any tire I've had on it
My bike's never been a wheelie prone bike on the street but tonight
ridin my normal road's were the bike would spin the tire
it's carrying the front tire two feet in the air.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 09 May 2013 16:26 #586603

  • racer54
  • racer54's Avatar
  • Offline
  • Sustaining Member
  • Posts: 1903
  • Thank you received: 114
That's good to hear!!! :laugh:
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110

Please Log in or Create an account to join the conversation.

Drag strip trip. 23 May 2013 22:51 #588955

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Tire up date!!
After a little round town riding and a 300 mile
ride this tire rock's.

Stickiest street tire I've had yet.
My bike has never been wheelie prone on the street and
now it'll carry front on roads it would blow the tire off before.

Good thing the new bars done cause I'll damn sure need it
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 26 May 2013 17:11 #589293

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 01 Jun 2013 09:53 #590248

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Game on.
I'll post update's later today if I have service at the track.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 07 Jun 2013 20:14 #591261

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
How to kick a ZRX's a$$





Left lane 7.65 to a losing 7.76.

The new tire is supper sticky it was all I could do to hold it in the water.
Low 1.80's sixty ft. tripping the light with the back tire.
Only made two pass with the bar Sat. night.
One time trial run went 7.78 so first round I dialed a 7.70
and went a 7.63 and put myself out.
Sunday ran no bar got in about six time runs and beat Eric's ZRX five in a row.
Won my first round pass then a Busa put me out second round.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Last edit: by zukdave.

Drag strip trip. 07 Jun 2013 21:08 #591265

  • peter1958
  • peter1958's Avatar
  • Offline
  • User is blocked
  • Posts: 1555
  • Thank you received: 198
WTG! But I feel bad you beating up on a green bike ya know.

Please Log in or Create an account to join the conversation.

Drag strip trip. 07 Jun 2013 22:53 #591282

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
From the first time we went to the track
Eric's said my bike would NEVER beat his ZRX.

This was 1/8 mile still have to beat him 1/4 mile.
Last time out Eric didn't bring his bike but
a buddy Will was there with his '99 ZRX 1100
with cams, carb's, and a pipe I beat him four in a row 1/4 mile.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 09 Jun 2013 13:59 #591455

  • crh
  • crh's Avatar
  • Offline
  • Banned
  • Posts: 101
  • Thank you received: 20

zukdave wrote: From the first time we went to the track
Eric's said my bike would NEVER beat his ZRX.

This was 1/8 mile still have to beat him 1/4 mile.
Last time out Eric didn't bring his bike but
a buddy Will was there with his '99 ZRX 1100
with cams, carb's, and a pipe I beat him four in a row 1/4 mile.


Simple...YOU know how to ride.....They don't ;) Still, even at that, beating the Rex in 1/4 mile says a lot!! You must have that 750 really working :)

Please Log in or Create an account to join the conversation.

Last edit: by crh.

Drag strip trip. 12 Jun 2013 20:21 #592005

  • randysway223
  • randysway223's Avatar
  • Offline
  • User
  • Posts: 4
  • Thank you received: 2
Nice. how much did it run you to add the wheelie bars in the back? Love the effect, looks pretty cafe racer ish.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum