- Posts: 8068
- Thank you received: 1656
Valve cover end seal replacement
- martin_csr
- Offline
- User
Less
More
01 Apr 2013 22:47 - 01 Apr 2013 22:52 #580065
by martin_csr
Replied by martin_csr on topic Valve cover end seal replacement
LarryC: Where did I read on here just recently that posts like this are forbidden
I think you are allowed to put a company link in your signature.
I think you are allowed to put a company link in your signature.
Last edit: 01 Apr 2013 22:52 by martin_csr.
Please Log in or Create an account to join the conversation.
- KZB2 650
- Offline
- User
Less
More
- Posts: 1475
- Thank you received: 265
22 May 2013 13:46 #588750
by KZB2 650
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.
Replied by KZB2 650 on topic Valve cover end seal replacement
I used permatex black silicone sealer on the 4 stockers and after redoing one not a drop after 4 trips and a hundred miles.
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.
Please Log in or Create an account to join the conversation.