Bassani Superbike Header for Z-1

  • KZDragon1102
  • Topic Author
  • Offline
  • User
More
09 Mar 2012 16:59 #508762 by KZDragon1102
Bassani Superbike Header for Z-1 was created by KZDragon1102
I had one of these in 1980 on my MKII. Can anyone find one of these. The pipe rode high and was a very large diameter and stayed the same from the collector to the end!
Doug :silly:

I always said I would only ride a Harley when one could pass me! I broke that promise and paid for it dearly. Never Again!

Please Log in or Create an account to join the conversation.

More
09 Mar 2012 17:35 #508768 by Mcdroid
Replied by Mcdroid on topic Bassani Superbike Header for Z-1
They appear infrequently on eBay...I picked one up two or three years ago for a very reasonable cost...still looking for a baffle for it.

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
09 Mar 2012 19:20 - 09 Mar 2012 19:49 #508771 by mark1122
Replied by mark1122 on topic Bassani Superbike Header for Z-1
they dont make them any more, but a member or 2 here, has 1. u will most likely have to ask at all the forums or watch for 1 on ebay.

Michael this should look familiar.

kzrider.com/forum/2-engine/271747-header...t=20&start=60#273922


Attachment Kerkermacbassani.jpg not found


76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Attachments:
Last edit: 09 Mar 2012 19:49 by mark1122.

Please Log in or Create an account to join the conversation.

More
09 Mar 2012 19:55 - 09 Mar 2012 19:57 #508777 by rstnick
Replied by rstnick on topic Bassani Superbike Header for Z-1
My buddy Tony's GS1100 with Bassani pipe:




Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Last edit: 09 Mar 2012 19:57 by rstnick.
The following user(s) said Thank You: mtkawboy

Please Log in or Create an account to join the conversation.

More
09 Mar 2012 22:56 #508800 by Boostable
Replied by Boostable on topic Bassani Superbike Header for Z-1
I bought one for the 1000 build, but currently have it on my 900. Sounds Great and really woke the bike up. Only pipe I ever had that I liked better was my Yosi back in the day!

~Jack

1982 KZ1000 J2 ~ Project (Street Fighter - Project Section)
1976 KZ900 - Daily Rider

Please Log in or Create an account to join the conversation.

  • BlackZ1R
  • Offline
  • User
  • Kawasaki in my blood
More
10 Mar 2012 00:41 #508822 by BlackZ1R
Replied by BlackZ1R on topic Bassani Superbike Header for Z-1
I don't see them come up very often, kinda rare these days to see one offered for sale.
They are nice pipes, and I like mine a lot :P .
There is a story on a red '78 KZ with a modified Bassani Superbike pipe on it that is more upswept than the production Bassani like on my '78.


Kawasaki


Someone once told me to marry that motorcycle I was riding ......there's times I wish I hadda listened .
Attachments:

Please Log in or Create an account to join the conversation.

  • BlackZ1R
  • Offline
  • User
  • Kawasaki in my blood
More
10 Mar 2012 09:43 #508855 by BlackZ1R
Replied by BlackZ1R on topic Bassani Superbike Header for Z-1

KZDragon1102 wrote: I had one of these in 1980 on my MKII. Can anyone find one of these. The pipe rode high and was a very large diameter and stayed the same from the collector to the end!
Doug :silly:

I believe you're thinking of the Yoshimura pipe that stays the same dia. from the collector to the end. The Bassani rides higher than the Yosh, but steps up to a larger dia. about 16" past the collector.

Kawasaki


Someone once told me to marry that motorcycle I was riding ......there's times I wish I hadda listened .

Please Log in or Create an account to join the conversation.

More
10 Mar 2012 10:36 #508861 by Patton
Replied by Patton on topic Bassani Superbike Header for Z-1
Yoshimura

1973 Z1
KZ900 LTD
Attachments:

Please Log in or Create an account to join the conversation.

  • KZDragon1102
  • Topic Author
  • Offline
  • User
More
19 May 2012 13:41 #523363 by KZDragon1102
Replied by KZDragon1102 on topic Bassani Superbike Header for Z-1
Yeah, the one on the right is the one I had! If anyone finds one for sale like that, please let me know at: hunt4freeh@yahoo.com
Thanks, Doug

I always said I would only ride a Harley when one could pass me! I broke that promise and paid for it dearly. Never Again!

Please Log in or Create an account to join the conversation.

  • KZDragon1102
  • Topic Author
  • Offline
  • User
More
19 May 2012 13:42 - 19 May 2012 13:44 #523364 by KZDragon1102
Replied by KZDragon1102 on topic Bassani Superbike Header for Z-1
Now that is what I remember on the orange bike. I blew my baffle out at the drag strip in El Paso. I thought it say higher but that is the same pipe! If anyone finds one for sale let me know at: hunt4freeh@yahoo.com
Thanks, Doug

I always said I would only ride a Harley when one could pass me! I broke that promise and paid for it dearly. Never Again!
Last edit: 19 May 2012 13:44 by KZDragon1102.

Please Log in or Create an account to join the conversation.

More
19 May 2012 17:49 - 19 May 2012 17:50 #523407 by Kapahulu
Replied by Kapahulu on topic Bassani Superbike Header for Z-1

KZDragon1102 wrote: I had one of these in 1980 on my MKII. Can anyone find one of these. The pipe rode high and was a very large diameter and stayed the same from the collector to the end!
Doug :silly:

I have a brand new one for a 1978 KZ1000, unused. If you REALLY want one let me know. I paid a lot for it and won't sell it for a loss.


1978 KZ1000, 1976 KZ900, 1975 H2, 1973 H1, 1973 H2, 1978 RD400, 1977 RD400, 1974 RD350
2strokeworld.com
Last edit: 19 May 2012 17:50 by Kapahulu.
The following user(s) said Thank You: KZDragon1102

Please Log in or Create an account to join the conversation.

More
20 May 2012 17:49 #523597 by pete greek1
Replied by pete greek1 on topic Bassani Superbike Header for Z-1
I have one laying around in my garage, its not in great shape or anything, the front was black & the rear was chrome when I bought it new in 88, so I had the front powder coated silver to match the chrome rear, after having it on my bike till 2010 the chrome started peeling & it has a couple of tiny rust holes on the bottom of the canister & a small ding on one of the down pipes....Ive been keeping it around, thinking of braising the pinholes, as they are on the bottom & it wont show, & then powder coating or painting the whole thing black...in my opinion it was the best sounding pipe, or a close tie to a yosh...it just sucked when it was time for an oil change.

1980 LTD 1000..,1976 LTD 900, have the 1000&900 now. the rest are previous= 1978 KZ 650 B.., 1980 Yamaha XT 500..,1978 Yamaha DT 400.., 1977 Yamaha yz 80..,Honda trail ct 70.., Honda QA 50...5-1/2 hp brigs & straton CAT chopper mini bike...3-1/2 hp mini bike (WHEN GAS WAS ABOUT 45 CENTS A GALLON)!!!!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum