KZ650 rebuild/custom mod project

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

KZ650 rebuild/custom mod project

27 Jun 2015 03:26
#678406
And here she is. Recently "saved" this KZ650 from a slow death. She was standing outside in a yard gathering sand in the bad Cape Town weather. Some negotiation and $167 later, she was on her way to my house B)

Now for the fun part of getting her fixed up and ready to ride! B)
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Attachments:

Please Log in or Create an account to join the conversation.

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

Re: KZ650 rebuild/custom mod project

27 Jun 2015 03:35
#678407
Since standing for almost a year, first thing was to get her home.
Next: put some fuel and spark to her to see if she will fire up. Oil level still ok and did not look like any water in the oil.
Needless to say, dead! :sick:

So I decided to start at a point....
  • New set of NGK's - very poor spark on 1,2 and 4
  • Removed and cleaned the carb - seriously dirty!
  • Checked coils - these were all ok
Replaced the fuel tank, connected all and she fired up :)

Now that I know she can run, it is the time needed to get her riding ready.....fun times ahead :)
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Please Log in or Create an account to join the conversation.

  • Tyrell Corp
  • Tyrell Corp's Avatar
  • Offline
  • User
  • "You were made as well as we could make you"
  • Posts: 1650
  • Thanks: 261

Re: KZ650 rebuild/custom mod project

27 Jun 2015 03:35
#678408
looking at the swingarm and more modern front end and rear wheel I guess that someone has
put quite a lot of time in to that before it got neglected. Got to be worth that in parts alone.
1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces

Please Log in or Create an account to join the conversation.

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

Re: KZ650 rebuild/custom mod project

27 Jun 2015 03:37
#678409
Yeah, I also think some bits and pieces were added and removed etc, but one can see close up poor workmanship....Will post more pics!
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Please Log in or Create an account to join the conversation.

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

Re: KZ650 rebuild/custom mod project

27 Jun 2015 03:43
#678411
Front end
The breaks seem to be locked so will remove all of this, clean up and replace if needed.
Will also need some new front rubber :)
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Attachments:

Please Log in or Create an account to join the conversation.

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

Re: KZ650 rebuild/custom mod project

27 Jun 2015 03:48
#678412
Rear end
In a reasonable condition but will need a good clean up and inspection. Rubber still good though :silly:
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Attachments:

Please Log in or Create an account to join the conversation.

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

Re: KZ650 rebuild/custom mod project

27 Jun 2015 03:52
#678413
Motor assembly

Reasonable condition. Will need a good clean up though!
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Attachments:

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • Posts: 15343
  • Thanks: 2829

Re: KZ650 rebuild/custom mod project

27 Jun 2015 06:00
#678427
Holy cow; it isn't just the swingarm, brakes, etc. that have been changed. The biggest change is the cylinder head! What engine did that cylinder head originally come on? It looks totally different than any KZ650 head. The first picture below shows yours. The 2nd and 3rd pictures show the KZ650 cylinder head. Notice that not only is the top where the cover attaches different, but the fins near the top are also different. Any ideas what it is? Ed

Attachment 00003-3.jpg not found



Attachment 00003a-47.jpg not found



Attachment 00003b-12.jpg not found

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • SWest's Avatar
  • Offline
  • Sustaining Member
  • 10 22 2014
  • Posts: 23202
  • Thanks: 2817

Re: KZ650 rebuild/custom mod project

27 Jun 2015 06:22
#678428
Zephyr head?
Steve
The following user(s) said Thank You: 650ed

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • Posts: 15343
  • Thanks: 2829

Re: KZ650 rebuild/custom mod project

27 Jun 2015 08:00 - 27 Jun 2015 08:01
#678443
swest wrote: Zephyr head?
Steve

That might be it! Here's a pic of a 750 Zephyr, and the head looks like a match. Ed

Attachment 00003a-48.jpg not found

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Attachments:

Last edit: 27 Jun 2015 08:01 by 650ed.

Please Log in or Create an account to join the conversation.

  • RickKZ
  • RickKZ's Avatar Topic Author
  • Offline
  • User
  • Posts: 57
  • Thanks: 3

Re: KZ650 rebuild/custom mod project

27 Jun 2015 13:53
#678503
That could be the case....The guy I bought this from did mention that he replaced the head with a reconditioned one.
This is a cyborg bike lol
KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Please Log in or Create an account to join the conversation.

  • rstnick
  • rstnick's Avatar
  • Offline
  • User
  • Posts: 4416
  • Thanks: 384

Re: KZ650 rebuild/custom mod project

27 Jun 2015 14:42
#678514
Welcome.
Nice project bike.
B)
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum