KZ 750 P1 scrambler
- Puffin
-
- Offline
- User
- Posts: 184
- Thanks: 32
- yeekim
-
Topic Author
- Offline
- User
- Posts: 72
- Thanks: 2
- kzz1king
-
- Offline
- User
- Posts: 822
- Thanks: 52
- yeekim
-
Topic Author
- Offline
- User
- Posts: 72
- Thanks: 2
Please Log in or Create an account to join the conversation.
- yeekim
-
Topic Author
- Offline
- User
- Posts: 72
- Thanks: 2
Re: KZ 750 P1 scrambler
10 May 2015 07:55
Hi!
After a successful seasons, decided to make this to my primary ride, while the choppers engine is "on the table"
Thought that a quick compression test is OK and........
2'nd cyl showed 0
Time+tools =bent inlet valve
A new valve from donor, some work and leak test and voilaa :laugh:
After a successful seasons, decided to make this to my primary ride, while the choppers engine is "on the table"
Thought that a quick compression test is OK and........
2'nd cyl showed 0
Time+tools =bent inlet valve
A new valve from donor, some work and leak test and voilaa :laugh:
Ex nihilo nihil fit!
Please Log in or Create an account to join the conversation.
- yeekim
-
Topic Author
- Offline
- User
- Posts: 72
- Thanks: 2
Re: KZ 750 P1 scrambler
01 Sep 2015 11:11
So the scrambler was my primary ride during chopper conversion works.
Changed the main jet to 120, raised the jet needle and made a bigger hole in slide and it's riding smooooth
Changed the main jet to 120, raised the jet needle and made a bigger hole in slide and it's riding smooooth
Ex nihilo nihil fit!
Please Log in or Create an account to join the conversation.
- yeekim
-
Topic Author
- Offline
- User
- Posts: 72
- Thanks: 2
- SWest
-
- Offline
- Sustaining Member
- 10 22 2014
- Posts: 23346
- Thanks: 2882