- Posts: 1648
- Thank you received: 12
1977 Kz 650 b1 resurection
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
08 Sep 2009 22:32 - 09 Sep 2009 21:23 #320076
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
1977 Kz 650 b1 resurection was created by oldkaws4ever
Ok i redid my 650 a while ago, but it never turned out as nice as i would have liked. The motor has an supposed 710cc wiesco piston kit, 26mm kz 1000 carbs, a 4 into 1 vance and hines header, but that will be replaced by a 4 into 1 kerker header my girlfriend bought me a few weeks ago. I have been working the bug's out of it for a bit now, and it actually runs sweet. This winter though, i want to pull the motor yet again, replace all the frame hardware, clean the motor and make it all shiny, get rid of the metalic mineral gray paint on the frame and bodywork. I want to powdercoat the frame glossy black, but i might have to settle on painting it depending on cashflow situations when that time comes. I want to paint the bodywork a metallic blue. This is what im doing for sure. I would like to possibly swap the front end out for one off of a 2005 suzuki gsxr 750. As far as the swingarm goes, i might be intrested in doing the gsxr 750 one, if i can keep the dual shocks? If not i will swap to a gs 1100 aluminum arm. Can i fit an 05 gsxr 750 rear wheel in the gs 1100 arm?
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Last edit: 09 Sep 2009 21:23 by oldkaws4ever.
Please Log in or Create an account to join the conversation.
- chance
- Offline
- User
- Life long biker/
Less
More
- Posts: 583
- Thank you received: 0
09 Sep 2009 03:47 #320082
by chance
Replied by chance on topic 1977 Kz 650 b1 reserection
If the axel is the same size I seen folks put up to a 180 on the Gs 1100 swingarm. Kano swaped his front end for a busa and had to press out the neck stem and press ih the KZ stem . Kano knows loads about this kind of swap ..
Please Log in or Create an account to join the conversation.
- MadMac74
- Offline
- User
Less
More
- Posts: 64
- Thank you received: 0
09 Sep 2009 13:09 #320200
by MadMac74
'78 KZ650 C2,810 conversion,stock kz 750 cams,with a Blueprinted Head both from a '81 KZ 750. BS 34 Mikunis, Mac /Kerker 4 into 1 with custom 2" comp baffle. 3 rd owner
'02 ZRX1200R, 3rd owner
'83 XR200R, 3 rd owner
'84 V65 Sabre 3 rd owner
Replied by MadMac74 on topic 1977 Kz 650 b1 reserection
Your girlfriend bought you a KERKER!!!!:woohoo: :woohoo: pretty cool!!
She's a keeper!!
MAC
She's a keeper!!
MAC
'78 KZ650 C2,810 conversion,stock kz 750 cams,with a Blueprinted Head both from a '81 KZ 750. BS 34 Mikunis, Mac /Kerker 4 into 1 with custom 2" comp baffle. 3 rd owner
'02 ZRX1200R, 3rd owner
'83 XR200R, 3 rd owner
'84 V65 Sabre 3 rd owner
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
09 Sep 2009 21:09 - 09 Sep 2009 21:24 #320332
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
Thank's chance, i will pm him for some more info on what i need to do. The gsxr 750 is my friends bike and it's in mint shape, but the motor is blown, i talked to him today, and he said he would sell me the complete front end withe the wheel, and the swingarm with the whole set up in the rear. Honestly i dont think i want the gsxr swingarm, i like the old school look of the gs 1100 boxed aluminum swingarm with dual shocks. Would it be possible to use gas filled shock's like the one's that come on the ELR's?
MadMac, she's a keeper for sure, she is actually in the garage with me at night helping me work on the bikes....she also gets on me if i let them sit for to long. Ya i couldnt belive my eyes, when the kerker header showed up, i had no clue she bought it for me. She did ask me like 2 week's before what year it was, and if i like kerker exhaust. This thing is super cleand no rust anywere, only the usual blueing.
MadMac, she's a keeper for sure, she is actually in the garage with me at night helping me work on the bikes....she also gets on me if i let them sit for to long. Ya i couldnt belive my eyes, when the kerker header showed up, i had no clue she bought it for me. She did ask me like 2 week's before what year it was, and if i like kerker exhaust. This thing is super cleand no rust anywere, only the usual blueing.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Last edit: 09 Sep 2009 21:24 by oldkaws4ever.
Please Log in or Create an account to join the conversation.
- perattzi
- Offline
- User
Less
More
- Posts: 48
- Thank you received: 0
09 Sep 2009 23:27 #320354
by perattzi
1978 KZ650B w/ Zuki running gear project
Replied by perattzi on topic 1977 Kz 650 b1 resurection
Damn, sounds like an awesome project, right up my alley! Streetfighter...or cafe? What's up with the old Vance and Hines system? My old old kerker has seen it's day...rusted all to hell. Must...not...buy...marving...exhaust... :side:
1978 KZ650B w/ Zuki running gear project
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
09 Sep 2009 23:35 #320356
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
Um im not sure whats up with the v and h pipe. It is very clean with minimal rust on the inside of the collector. It has the normal blueing on the head pipes. Ill let ya know in a few weeks when i start tearing into it. Im going for a streetfighter kinda look. I was looking over at americanclassics.com, those marving exhaust are sweet, but so much freekin money.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
15 Sep 2009 12:48 #321802
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Attachments:
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
15 Sep 2009 12:53 #321803
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Attachments:
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
15 Sep 2009 12:58 #321804
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Attachments:
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
15 Sep 2009 13:03 #321805
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Attachments:
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
15 Sep 2009 13:06 #321807
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Attachments:
Please Log in or Create an account to join the conversation.
- oldkaws4ever
- Topic Author
- Offline
- User
- Have no regrets...... You only live once.
Less
More
- Posts: 1648
- Thank you received: 12
15 Sep 2009 17:54 #321859
by oldkaws4ever
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Replied by oldkaws4ever on topic 1977 Kz 650 b1 resurection
I have been debating on it, im going to flip the clubmans the other way, for me it felt more comfortable.....personal preference i guess.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.