TOPIC:

I bought this bike in a fairly ugly state.

Here it is after I disassembled the whole works and did some paint work and put about 8,000 miles on it.

Now it's getting the full treatment, for the frame I'm going to powdercoat once I have all my tabs fitted for z1 side covers.

For the engine I have a 73 z1 crankshaft, 1075 piston kit and a "J" head ready to go, I just have to bore the jugs and install the crank.

I've already fit a gs1100e swingarm, z1 tail and light and yes the extra ride height is on purpose(I dont like low bikes).
Here she is now, pardon the ugly tank its for mock up use only.


Just for those folk's who cant have enough bike pics.
s11.photobucket.com/albums/a199/i800phyco/

Post edited by: i800phyco, at: 2008/02/07 23:46

Post edited by: i800phyco, at: 2008/02/07 23:47

Post edited by: i800phyco, at: 2008/02/12 18:20

cool.i experimented with the red frame and black bodywork once just to see,i didnt like it either;)

Looking nice! Are those mags bead blasted or painted? They came out pretty cool. Doug

I agree with Zedone ... looking good !

My favorite KZ of all time would be a 77 or 78 KZ1000LTD in stock / restored condition. Someday .... till then my 750 LTD will have to do !

Zedone wrote:

Looking nice! Are those mags bead blasted or painted? They came out pretty cool. Doug

First I glass beaded them to bare alum, then painted them.

Gives me hope...I have an unassembled KZ1000A1 sitting in my garage...

Just went through your photobucket pics and have two comments...

1. Dude! You have my KZ650F1!! Nice, I want it back!!

2. Need more pics of the Pro Street, nice!.

Bluemeanie wrote:

Just went through your photobucket pics and have two comments...

1. Dude! You have my KZ650F1!! Nice, I want it back!!

2. Need more pics of the Pro Street, nice!.

The t-bird is my dad's project, It's almost done.
Pics per request.

Got the side covers mounted today, The position had to be altered a little to accommodate the bs34/pods, it looks better in person.


And a pic of the swingarm/brake. Now with proper sized rotor (had ltd rotor witch was to small in diameter).

Well I finely got back to working on this one, It's not quite done yet but this is it for this year I'll just have to ride it as is.

This is coming out well ; thumbs up.

i800phyco,
Nice ride. I'm currently making a Z1 clone out of a KZ900. Was wondering how you altered the frame tabs to fit the Z1 side covers? I planned to alter a pair of aftermarket side covers to fit the KZ frame unless it isn't possible. I really don't want to cut the frame. Got any pics?