Thanks for letting me join the forum I'm DustyDeck and I have a KZ650 with MODS

I will include the air corrector jets in my next Z1 order. Thanks

Welcome Dusty from Canada.
I don't think you can buy the corrrector jets from Z1Enterprises.
Only through Rob above.

Nice looking 650!
 

Yes I am very interested in them. I am getting an order together now. I am already reading up on them. Do you know what sizes I should likely require with the 105s or does it matter? Somewhere between 100 and 200 for VM24s?
thankyou

Thanks, I will ask Rob.
 

Hello Rob, I understand from the other very helpful members (Wookie58) that you are the member to talk to if I need "air correctors" for my VM24 carbs. I'm running #105 mains now with #15 pilots, pods and 4into1. I haven't synced the carbs or fine tuned the air screws yet. I know nothing about "air correctors" I have read  about alternatively tuning the "off idle flat spots" out but I have not tried it yet. Could you advise me of how to go next Thankyou alot

And rstnick

dustydeck wrote:

Hello Rob, I understand from the other very helpful members (Wookie58) that you are the member to talk to if I need "air correctors" for my VM24 carbs. I'm running #105 mains now with #15 pilots, pods and 4into1. I haven't synced the carbs or fine tuned the air screws yet. I know nothing about "air correctors" I have read  about alternatively tuning the "off idle flat spots" out but I have not tried it yet. Could you advise me of how to go next Thankyou alot

Have sent you a PM with Rob's email address

Tthanks. Wookie58. I have ordered the "Air Correcting Jets" I will let you know how it goes. KZRiders are great!

Air Correcting Jets are lost in the Canadian postal strike. No telling when I will receive them. You can bet I will be asking questions once they arrive. Thanks everyone. I am looking at a set of Ninja 600r CVK carbs too.

Hello KZ Gurus, I hope all is well. I just received my "air correcting JETS" THANKYOU. It was also suggested that I switch from the VM24s to CVK ZX600r Ninja carbs. I have scored a pretty nice set on Ebay. My question is: do I have to switch the throttle control and cables on my KZ650 over to the ZX600r Ninja system. I will rebuild the CVK carbs but I thought I should ask to see if there is anything else I need to know. My KZ650 has an ZX600r Ninja transmission. Thankyou for your time and knowledge.  DustyDeck

Welcome from the UK, where in the world are you ?

I'm on the edge of the earth. The West Coast, Port Alberni, BC Canada.