KZR's Bikes of the Month for 2024

How to remove rust from tank

More
05 Oct 2015 16:31 - 06 Oct 2015 16:18 #693508 by kz n az
How to remove rust from tank was created by kz n az
I checkout the tect-tips on the forum here about rust removal but was wondering, do you agree. Or is there a better way ( no disrespect to the person ) This was a problem before and its back and what would you seal it with.
THANKS EVERYONE.


Thanks Everyone. I believe I will remove the rust and try not sealing it. But will keep a close eye on it.
THX. Jim
Last edit: 06 Oct 2015 16:18 by kz n az.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
05 Oct 2015 16:37 #693509 by SWest

Please Log in or Create an account to join the conversation.

More
05 Oct 2015 16:41 #693511 by kz n az
Replied by kz n az on topic How to remove rust from tank
really not to bad nothing deep if that what yiu mean

Please Log in or Create an account to join the conversation.

More
05 Oct 2015 16:47 #693512 by 650ed
Replied by 650ed on topic How to remove rust from tank
After the rust is removed you should not need to seal it. All you need to do is keep fuel in the tank and it won't rust. Rust happens when the tank is left empty or partially empty because moisture and condensation collect on the inside and form rust. That doesn't happen if fuel is in the tank instead of air. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
05 Oct 2015 16:48 #693513 by SWest

Please Log in or Create an account to join the conversation.

More
05 Oct 2015 16:54 #693515 by Nessism
Replied by Nessism on topic How to remove rust from tank
I've done a lot of tank cleaning and lining and like to use phosphoric acid to derust. Home Depot sells Kleenstrip Etch n Prep for about $14/gallon. Be sure to remove all petcock, sending unit, etc., before derusing. Rinse well with water and use some alcohol or WD-40 immediately after rinsing to retard flash rusting.

Please Log in or Create an account to join the conversation.

More
05 Oct 2015 18:09 #693525 by jackleberry
Replied by jackleberry on topic How to remove rust from tank
Evaporust!

1997 KZ1000P (P16)
2001 KZ1000P (P20)

Please Log in or Create an account to join the conversation.

  • KZQ
  • Offline
  • Administrator
  • Walking Behind the Corn May Not Be All That!
More
05 Oct 2015 18:19 - 05 Oct 2015 18:20 #693526 by KZQ
Replied by KZQ on topic How to remove rust from tank

kz n az wrote: I checkout the tect-tips on the forum here about rust removal but was wondering, do you agree. Or is there a better way ( no disrespect to the person ) This was a problem before and its back and what would you seal it with.
THANKS EVERYONE.

No there is no better way. But then I'm NOT impartial. As Ed said there's no need to seal the tank, just keep it full.
Bill

www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Valkyrie, 2009 Yamaha Roadliner S. 1983 GL 1100
Projects:
1985 ZN1300
Last edit: 05 Oct 2015 18:20 by KZQ.

Please Log in or Create an account to join the conversation.

  • ThatGPzGuy
  • Offline
  • Sustaining Member
  • More Sparky than Speed Racer
More
06 Oct 2015 01:32 #693539 by ThatGPzGuy
Replied by ThatGPzGuy on topic How to remove rust from tank
I've used the electrolysis method on a XS650 tank that I thought was too far gone. Came out like new!
As for tank liners, I use Red Kote on anything questionable especially if I am going to be investing in paint.

Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"

Please Log in or Create an account to join the conversation.

More
06 Oct 2015 13:26 #693599 by bountyhunter
Replied by bountyhunter on topic How to remove rust from tank

kz n az wrote: really not to bad nothing deep if that what yiu mean

Dumb question: rust on outside or inside? I'm an old body man and I thought you meant rust on the outside.

1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

More
07 Oct 2015 06:16 #693648 by davido
Replied by davido on topic How to remove rust from tank
I used brown vinegar. Very cheap and it works a treat.I soaked it for a couple of weeks then rinsed it out with soda,dried it and gave it a misting with WD40 to stop the flash rust. Came out great.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
07 Oct 2015 07:52 #693660 by MDZ1rider
Replied by MDZ1rider on topic How to remove rust from tank
I vote with Jackelberry. Evaporust is the best thing I've ever used. It's not acid based and does not harm paint. It also requires no agitation. Just pour it in and let it sit over night. Unfortunately it's also expensive. You'll need at least 2 gallons at appox. $25.00 each. However, it can be reused. I've used the same batch on 3 tanks so far. I figure I'm now down to $15 per tank.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.