KZR's Bikes of the Month for 2024

Engine polishing methods...

More
20 Sep 2014 04:30 #648137 by Rockranch
Engine polishing methods... was created by Rockranch
Looking for different methods for cleaning and polishing aluminum parts such as cylinder blocks, cylinder heads and lower fork tubes.

(2)-1976 KZ900B-LTD's
1-all stock low mileage...
1 modified
1977 KZ1000 (awaiting resurrection!) :)
...and an old school Honda CB750 Chopper is next on my bucket list!

Oh...and a Pocket Rocket lol!!!

Please Log in or Create an account to join the conversation.

More
20 Sep 2014 05:56 - 20 Sep 2014 05:58 #648140 by 650ed
Replied by 650ed on topic Engine polishing methods...
I used paper towels, rags, popsicle sticks, the 2 polishes shown in the first 2 images below, and elbow grease to polish my engine (see last 2 images). Ed





Attachment IMG_0053.jpg not found



Attachment IMG_0055.jpg not found


1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Attachments:
Last edit: 20 Sep 2014 05:58 by 650ed.

Please Log in or Create an account to join the conversation.

More
20 Sep 2014 20:39 #648230 by jenkrider
Replied by jenkrider on topic Engine polishing methods...
Ed, that looks great! I will have to try that on other bikes that are not disassembled at the moment...

Here is my most current method, depending on how bad your metal is to begin with -

1) Wet sand with super fine sandpaper with something like Boeshield T9
2) Buff with Emery compound
3) Buff with Tripoli compound
4) Buff with Jewelers Rouge
5) Buff or cloth rub something like Mother's aluminum polish.

As far as things like the engine block itself, I just use some steel wool and an aluminum/steel cleaner in a spray can that I got at the dollar store.

The above method is for polishing aluminum engine covers, also can be for fork tubes, etc. Be sure to rub with mineral spirits between steps to get rid of excess compound. Steps can be skipped or added. I am not a pro and things like valve covers are really hard to do, even with a dremel. Over time I have learned how to polish and clean my stuff to a degree that I am happy with, but not a $600 polishing job or an eternity in the garage.

Good luck! Attached are some things I did last week. Doing a lite resto on my 900 with some modifications.


Attachment NCM_0271.jpg not found



Attachment NCM_0273.jpg not found


76' KZ900
00' KLR650
82' XV920 Virago
74' Ironhead Sportster
Attachments:

Please Log in or Create an account to join the conversation.

More
20 Sep 2014 20:39 #648231 by jenkrider
Replied by jenkrider on topic Engine polishing methods...
Ed, that looks great! I will have to try that on other bikes that are not disassembled at the moment...

Here is my most current method, depending on how bad your metal is to begin with -

1) Wet sand with super fine sandpaper with something like Boeshield T9
2) Buff with Emery compound
3) Buff with Tripoli compound
4) Buff with Jewelers Rouge
5) Buff or cloth rub something like Mother's aluminum polish.

As far as things like the engine block itself, I just use some steel wool and an aluminum/steel cleaner in a spray can that I got at the dollar store.

The above method is for polishing aluminum engine covers, also can be for fork tubes, etc. Be sure to rub with mineral spirits between steps to get rid of excess compound. Steps can be skipped or added. I am not a pro and things like valve covers are really hard to do, even with a dremel. Over time I have learned how to polish and clean my stuff to a degree that I am happy with, but not a $600 polishing job or an eternity in the garage.

Good luck! Attached are some things I did last week. Doing a lite resto on my 900 with some modifications.


Attachment NCM_0271_2014-09-20.jpg not found



Attachment NCM_0273_2014-09-20.jpg not found


76' KZ900
00' KLR650
82' XV920 Virago
74' Ironhead Sportster
Attachments:

Please Log in or Create an account to join the conversation.

More
20 Sep 2014 20:44 #648233 by 650ed
Replied by 650ed on topic Engine polishing methods...
If you use a spray cleaner be sure NOT to use oven cleaner. It can permanently stain your engine cases. Be sure to check container warnings for safe use on aluminum. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
20 Sep 2014 22:09 - 20 Sep 2014 22:28 #648236 by Rockranch
Replied by Rockranch on topic Engine polishing methods...
Thanks for the tip Ed. I'll try to find those 2 polishing compounds and give them a try. My '76 LTD900 isn't bad at all like she is and actually is very near showroom condition. I bought 'er new from the dealer when I was about to graduate High School back in '76. But even new engines can look even better with a bit of work. And parts like my lower fork tubes cld use a bit of extra shine. I have 2 others that I'm restoring. I'm always lookin for ways to make my priceless treasures even better. Nice lookin' 650 Custom BTW. I had a silver one a bit modified with a Kerker and K&N's...wow what a rocket for it's size. Wish I still had it too. But I wldn't trade my '76 900LTD's for anything on earth. Thanks for the reply. maybe we cld chat and swap stories sometime...........Mike

(2)-1976 KZ900B-LTD's
1-all stock low mileage...
1 modified
1977 KZ1000 (awaiting resurrection!) :)
...and an old school Honda CB750 Chopper is next on my bucket list!

Oh...and a Pocket Rocket lol!!!
Attachments:
Last edit: 20 Sep 2014 22:28 by Rockranch.

Please Log in or Create an account to join the conversation.

More
20 Sep 2014 22:28 - 20 Sep 2014 22:28 #648239 by Rockranch
Replied by Rockranch on topic Engine polishing methods...

Attachment IMG_0592.jpg not found


I wld never use a spray cleaner like that anyway but thx for the note.

(2)-1976 KZ900B-LTD's
1-all stock low mileage...
1 modified
1977 KZ1000 (awaiting resurrection!) :)
...and an old school Honda CB750 Chopper is next on my bucket list!

Oh...and a Pocket Rocket lol!!!
Attachments:
Last edit: 20 Sep 2014 22:28 by Rockranch. Reason: wrong place for pic

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
21 Sep 2014 03:15 #648244 by DoctoRot
Replied by DoctoRot on topic Engine polishing methods...

Rockranch wrote:

Attachment IMG_0592.jpg not found


I wld never use a spray cleaner like that anyway but thx for the note.


Very nice bike! Your fork lowers have a clear coat on them, thats why they are a bit yellow. i would strip the paint off them before polishing. makes 0it a bit easier than sanding through the paint.

This is from a different thread, i have found it works REALLY well for getting in between the fins.


bluej58 wrote: I used a small hemostat with cut up squares of Scotchbrite and cotton tee shirt for the stripping, scrubbing ,cleaning and polishing this last time and was very happy with the way it worked for me.

















[/attachment]

Please Log in or Create an account to join the conversation.

More
21 Sep 2014 11:04 - 21 Sep 2014 11:15 #648263 by Rockranch
Replied by Rockranch on topic Engine polishing methods...
That's a cool handy tool too. I found that the buffing head for the cleaning rod of a 410 shotgun works awesome and the perfect size in a drill chuck for buffing between engine fins, and the drill does most o' the work. A guy can never have too many tools in his arsenal lol. Whatever method you use takes time and effort but so awesome when done. KEEPING them that way is quite easy with regular care and a feather duster, air hose and a dab of polish here n there. A pic of my motor about a year and a half ago.

(2)-1976 KZ900B-LTD's
1-all stock low mileage...
1 modified
1977 KZ1000 (awaiting resurrection!) :)
...and an old school Honda CB750 Chopper is next on my bucket list!

Oh...and a Pocket Rocket lol!!!
Last edit: 21 Sep 2014 11:15 by Rockranch. Reason: pics didn't load

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.