KZR's Bikes of the Month for 2024

What chassis can a 77 Kz750 twin be transferred to?

  • shootanappleoffmyhead
  • Topic Author
  • Offline
  • User
More
18 Aug 2023 03:04 #888439 by shootanappleoffmyhead
What chassis can a 77 Kz750 twin be transferred to? was created by shootanappleoffmyhead
Hi! 
Does anyone know what chassis, other than the original 77 Kz750 twin chassis, I could transfer the 750 to with no fabrication/modification? I recently found rust holes at the bottom of the chassis so I’m riding a death trap. 

thanks! 

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
18 Aug 2023 03:48 #888440 by Wookie58

Hi! 
Does anyone know what chassis, other than the original 77 Kz750 twin chassis, I could transfer the 750 to with no fabrication/modification? I recently found rust holes at the bottom of the chassis so I’m riding a death trap. 

thanks! 
I suspect you may be overly optimistic with the above request 

Please Log in or Create an account to join the conversation.

More
18 Aug 2023 04:46 - 18 Aug 2023 05:07 #888442 by martin_csr
Probably any KZ750-Twin frame.  The engine was pretty much unchanged throughout the 76-84 model run, including the kick starter.  From the cross-reference at partzilla they all had the same crankcase set.

steel and bountyhunter know a lot about the KZ Big Twins, so their old posts can be helpful. I haven't seen either on here in quite a while.
Last edit: 18 Aug 2023 05:07 by martin_csr.
The following user(s) said Thank You: shootanappleoffmyhead

Please Log in or Create an account to join the conversation.

More
18 Aug 2023 04:58 #888443 by zed1015
Rust on the bottom rails is very common due to water ingress through partially welded joints especially under the rear shock mount gussets etc.
Any good welder who knows his stuff should be able to section out the rotten areas and replace with new steel to make the frame as good or better than new and also identify and seal any partially open factory welds to prevent it happening again.
Ideally have the bare frame blasted to reveal the true extent of corrosion then have it powdercoated after repair.


 

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





The following user(s) said Thank You: slayer61, Wookie58

Please Log in or Create an account to join the conversation.

More
18 Aug 2023 06:16 #888444 by TexasKZ
Any used frame you might purchase may be well advanced in the same process of rusting, and may have other surprises waiting for you. Repairing what you have may be the best solution.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
The following user(s) said Thank You: sf4t7, Wookie58

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.