Brake lines touch front fender

I have a problem with the brake lines touch the front fender when I`m driving.... 
Any idea to improve/fix these ?

See pictures below:
 

You can turn your brake line connection so the twist tention move it away from the fender.

 

You can swap in different brackets.


Evilbay 313812247582

Have you compared your fender guides to other models? maybe compare yours to the KZ750E or H?

I cannot twist mine brike lines… should properly bought different back in time…

Scirocco wrote:

You can turn your brake line connection so the twist tention move it away from the fender.

 

 

compare and see if they looks better and purchase preown on ebay? 

thank you will try that

martin_csr wrote:

Have you compared your fender guides to other models? maybe compare yours to the KZ750E or H?

So these type make the brake line to come further out?

Mikaw wrote:

You can swap in different brackets.


Evilbay 313812247582

Maybe fit a rigid sleeve over the brake line as it passes through the guide to force it away from the fender ?   I had the same problem, but it was because I had lowered the front end causing the lines and cables to bunch up and rub where they normally wouldn't have.

urankjj wrote:

Maybe fit a rigid sleeve over the brake line as it passes through the guide to force it away from the fender ?   I had the same problem, but it was because I had lowered the front end causing the lines and cables to bunch up and rub where they normally wouldn't have.

Do you have a exmaple for rigid sleeve, picture/link ? 

Thank you 

Another option. Maybe unbolt the caliper, then spin it around? But this may have the opposite effect of forcing the brake lines too far outward. and might stress the brake lines?

martin_csr wrote:

Another option. Maybe unbolt the caliper, then spin it around? But this may have the opposite effect of forcing the brake lines too far outward. and might stress the brake lines?

 

Not sure about the USA but in the UK a twisted flexi-pipe is an MOT fail 

plastic spiral brake line shieth



or (split rubber line with zip tie)