KZR's Bikes of the Month for 2024

Where might this go ?

More
16 Nov 2019 11:29 #814061 by MAR-VEL
Where might this go ? was created by MAR-VEL
Hey guys. I took the rear wheel of my 1981 KZ750 4cyl , as I took out the rear axle t his spacer fell off ( see pic ) and I cant for the life of me see where It might go . Any help would be really helpful . Thanks .
Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
16 Nov 2019 15:48 #814069 by SWest
Replied by SWest on topic Where might this go ?
Does it go on the chain cush drive side next to the adjuster?
Steve

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
16 Nov 2019 15:50 - 16 Nov 2019 15:50 #814070 by SWest
Replied by SWest on topic Where might this go ?
BTW, I deleted your duplicate on this subject.
Steve
Last edit: 16 Nov 2019 15:50 by SWest.
The following user(s) said Thank You: Nessism, MAR-VEL

Please Log in or Create an account to join the conversation.

More
16 Nov 2019 16:15 #814072 by loudhvx
Replied by loudhvx on topic Where might this go ?
It will go into an area with a rubber seal. See the shiny ring around the outside? That ring was worn by a rubber seal, so that will give a clue where it goes.

Please Log in or Create an account to join the conversation.

More
17 Nov 2019 06:25 #814090 by davido
Replied by davido on topic Where might this go ?

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.