KZR's Bikes of the Month for 2024

KZ400 Position Lights

More
23 Nov 2022 09:48 #877096 by Feanor_twh
KZ400 Position Lights was created by Feanor_twh
I recently replaced the destroyed handlebar controls on my KZ400 with a very well made replica. In addition to the aesthetic improvements, I now have the PASS function added to the HORN function (wonderful), and now I also have the front light switch, which allows lights to be turned off when stationary, including the dash lights (wonderful again).

However, my bike does not have position lights, and I would like to have that option. Does anyone know what exactly are the European models to look for a European headlight? I understand that the European versions were the ones with front position lighting.

(1976) Kawasaki KZ400-D3. All original, but: electronic reg/rec (Oregon Motorcycle Parts), new handlebar controls (w/ PASS/HORN/lights switch, LED dash lights (superbrightleds.com), Dynatek coil (3ohm), MAC mufflers, HEL brake hoses, rubber fork boots, 4.00 rear tyre (Dunlop K70), chromed chainguard

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
23 Nov 2022 11:07 #877098 by Wookie58
Replied by Wookie58 on topic KZ400 Position Lights
Not sure what you are referring to as "position lights" UK would be no good to you as they dip to the left but we have
  1. Main Beam
  2. Dipped Beam
  3. Sidelight (this is normally a low wattage bulb in the headlight which comes on with the tail light and instrument lights")
American spec have three wire turn signals on the front which gives them "marker lights" in the turn signals not the headlight
What function is it that you are looking for ?
The following user(s) said Thank You: Feanor_twh

Please Log in or Create an account to join the conversation.

More
23 Nov 2022 15:08 #877103 by Feanor_twh
Replied by Feanor_twh on topic KZ400 Position Lights
Clearly
3. Sidelight.

I've been looking but can't find any headlight that contain that added bulb with its corresponding wiring.

(1976) Kawasaki KZ400-D3. All original, but: electronic reg/rec (Oregon Motorcycle Parts), new handlebar controls (w/ PASS/HORN/lights switch, LED dash lights (superbrightleds.com), Dynatek coil (3ohm), MAC mufflers, HEL brake hoses, rubber fork boots, 4.00 rear tyre (Dunlop K70), chromed chainguard

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
23 Nov 2022 17:48 #877114 by Scirocco
Replied by Scirocco on topic KZ400 Position Lights
A "side light" or position light bulb need an extra slot/socket in the reflector of the headlight.

 

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
24 Nov 2022 00:40 #877129 by Wookie58
Replied by Wookie58 on topic KZ400 Position Lights
The below diagram shows what I believe you are looking for on a European spec KZ1000j (I am sure there will be others)

 
The following user(s) said Thank You: Feanor_twh

Please Log in or Create an account to join the conversation.

More
24 Nov 2022 01:38 #877132 by Feanor_twh
Replied by Feanor_twh on topic KZ400 Position Lights

The below diagram shows what I believe you are looking for on a European spec KZ1000j (I am sure there will be others)

 
 
That gives me a more precise idea of what I'm looking for. However I have looked in Partzilla and can't find any KZ400 headlights that have that sidelight.
I'm going to look for models that shared a headlight with the KZ400.

I keep investigating.

(1976) Kawasaki KZ400-D3. All original, but: electronic reg/rec (Oregon Motorcycle Parts), new handlebar controls (w/ PASS/HORN/lights switch, LED dash lights (superbrightleds.com), Dynatek coil (3ohm), MAC mufflers, HEL brake hoses, rubber fork boots, 4.00 rear tyre (Dunlop K70), chromed chainguard

Please Log in or Create an account to join the conversation.

More
24 Nov 2022 04:17 - 24 Nov 2022 04:32 #877133 by Warren3200gt
Replied by Warren3200gt on topic KZ400 Position Lights
All you need is a 7inch replacement headlight for an original mini also used on hundreds of other cars. You position light is known as a pilot bulb in Europe. 
Only thing to look out for is if its LH or RH orientation.  They are a straight replacement fit.
 I can't post a link but they all over ebay. 
item/225131695241 = RH
item/134000944883 = LH 


Z1000J2 somewhat modified!

Last edit: 24 Nov 2022 04:32 by Warren3200gt.
The following user(s) said Thank You: Feanor_twh

Please Log in or Create an account to join the conversation.

More
24 Nov 2022 12:50 #877161 by TexasKZ
Replied by TexasKZ on topic KZ400 Position Lights

The below diagram shows what I believe you are looking for on a European spec KZ1000j (I am sure there will be others)

 

 
That gives me a more precise idea of what I'm looking for. However I have looked in Partzilla and can't find any KZ400 headlights that have that sidelight.
I'm going to look for models that shared a headlight with the KZ400.

I keep investigating.
So far as I know, these were never used in the U.S., so parts sellers here will not have it.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

More
24 Nov 2022 16:57 #877165 by Feanor_twh
Replied by Feanor_twh on topic KZ400 Position Lights
The original headlight has tabs that the replacement doesn't, it probably won't fit properly and I'll lose directional adjustment.

I don't mind paying more money for a compatible headlight instead of a cheaper generic version, but I still don't know if there is a sidelight headlight for the KZ400 or which of these headlights from other models would be compatible.

It appears the KZ650 mounted a 7-inch headlight with sidelight, apparently compatible with the KZ400, but I'm not sure.

(1976) Kawasaki KZ400-D3. All original, but: electronic reg/rec (Oregon Motorcycle Parts), new handlebar controls (w/ PASS/HORN/lights switch, LED dash lights (superbrightleds.com), Dynatek coil (3ohm), MAC mufflers, HEL brake hoses, rubber fork boots, 4.00 rear tyre (Dunlop K70), chromed chainguard

Please Log in or Create an account to join the conversation.

More
24 Nov 2022 23:54 #877167 by Warren3200gt
Replied by Warren3200gt on topic KZ400 Position Lights
Trust me, it'll fit perfectly. I've used them on several restoration projects. The black 650 below has one fitted which is an American bike I imported into the UK.


Z1000J2 somewhat modified!

Please Log in or Create an account to join the conversation.

More
25 Nov 2022 03:44 #877168 by danr123
Replied by danr123 on topic KZ400 Position Lights
HELLO
MY TOO I'M WORKING ON MY HEADLIGHT
KAWASAKI 1978 KZ400B1 
I REPLACING MY PART WITH A OTHER  MODEL HONDA CB
AND NOW I NEED A BULB 50/35 WATTS H4 IT IS DIFFICULT TO FIND

 

HELLO

MY VINTAGE KAWASAKI KZ400 1978

Please Log in or Create an account to join the conversation.

More
25 Nov 2022 11:45 #877183 by danr123
Replied by danr123 on topic KZ400 Position Lights
hello

me I replacing my headlight with a new one the honda model is 6 inch
and on the original part is 61/4'' on my kz400    that a diameter for the lens.
emgo 6'' for honda  or 7" for kawasaki
part number 66-64313  you can search
for honda you can use a bulb but for the kawasaki model you need a seal light but it is difficult to find the light for kawasaki
that,S for us or canada model

HELLO

MY VINTAGE KAWASAKI KZ400 1978

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.