ZN1100 Frankenbike with points !

The ZN seal od is about 1.185, the id about 1.250. The seal is an NGK AC1803F.

The od number I posted isn't right, I'll measure it again in the morning. My dyslexia is acting up again........

I measured in MM's. I'll use the calipers and set it to inches. I'll post them a little later.
Steve

The seal OD is 1.573" , ID is .965" +/- .
Steve
Spare one

If you scroll down the figment chart, you will see that the ZN uses the very same seal as all the J model engines , that is all KZ1000 and 1100 from 1981 onward. It also fits all the 1000 Concours and others.

The crank pins are larger right?
Steve

www.partzilla.com/product/kawasaki/92049...93b1c3b98ae90d11ac68

Measured the seal again this morning. The ID listed is about right, 1.250" or about 32 mm. The OD is about 1.890" or 48 mm. The seal part number is listed for a lot of other models but maybe not for the r/h housing ?

This 1984 ZN1100B I have is kinda weird...my rotor/advancer looks nothing like the ones I’ve seen on the kz’s ...I just ordered a factory oem electronic ignition...I have the factory kz1000 inner cover...and hoping I can use my original rotor...I read this in hopes I can get help so...help me out fellas!!