KZR's Bikes of the Month for 2024

One white plug

More
13 Oct 2024 08:47 #905061 by Maxbou92
One white plug was created by Maxbou92
Hello guys, my bike left the dyno like I post before.. he runs like hell, Very well!!! Today I have remove all plugs. And the right one (4) is tan/white.. all the others are similar(nice brown) ?!! Compression 150psi on all 4..  what are your thought about it? 
Kz750e 1980
Attachments:

Please Log in or Create an account to join the conversation.

More
13 Oct 2024 09:04 #905062 by zed1015
Replied by zed1015 on topic One white plug
Unless the plug was removed during a high speed plug chop the colour only indicates running conditions at idle.
If this is the case then the pilot/idle mix may need richening slightly which can usually be done on the mixture screw.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





The following user(s) said Thank You: Injected

Please Log in or Create an account to join the conversation.

More
13 Oct 2024 09:10 #905063 by Maxbou92
Replied by Maxbou92 on topic One white plug
They are all like the left one.. instead the 4 one at the right
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
13 Oct 2024 09:11 #905064 by Maxbou92
Replied by Maxbou92 on topic One white plug
Thank youu man
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
13 Oct 2024 09:13 #905065 by Maxbou92
Replied by Maxbou92 on topic One white plug
Your air corrector are soo good.. some bug at 3000rpm but its day and night if I compare it before now
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
13 Oct 2024 10:37 - 13 Oct 2024 10:39 #905066 by zed1015
Replied by zed1015 on topic One white plug

They are all like the left one.. instead the 4 one at the right
Ideally you want a light turn of soot on the base ring and a tan earth electrode with a colour change near the bend.
The one on the right is near perfect.
The other three are slightly rich so lean off the pilot mix on those cylinders.
This could also be caused by high float levels in those three carbs.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 13 Oct 2024 10:39 by zed1015.
The following user(s) said Thank You: Injected, Warren3200gt

Please Log in or Create an account to join the conversation.

More
13 Oct 2024 12:07 #905068 by Maxbou92
Replied by Maxbou92 on topic One white plug
I have turn them at 1 1/4 turn instead of 1 1/2 !! Float,needle and needle seat are brand new setting at 26mm +\- 1mm 
mercii
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
14 Oct 2024 06:38 #905084 by Maxbou92
Replied by Maxbou92 on topic One white plug
The plugs are still black at 1 1/4 turn. What can cause that if all the carbs were at 1 1/2 turn out before?! Why the 4cylinder is perfect and the 3 others are black?! Engine is brand new..
Kz750e 1980
The following user(s) said Thank You: willemZ900

Please Log in or Create an account to join the conversation.

More
14 Oct 2024 07:02 #905086 by Wookie58
Replied by Wookie58 on topic One white plug
Have you replaced the choke plunger seals (Zed1015 does these also) looking at your dyno graph you look rich at the bottom end- and a little "lean" between 3000-4000 the rest of the way up looks great (are you on stock needles ?)
1982 KZ1000 Ltd
www.kzrider.com/forum/11-projects/617631...-82-begins?start=192
kzrider.com/filebase-alias?view=download...d-fault-diagnosis&ca

Please Log in or Create an account to join the conversation.

More
14 Oct 2024 07:16 #905087 by Maxbou92
Replied by Maxbou92 on topic One white plug
Humm no the plungers are the same as 1979 and stock needle too .. my guy said that pilot transition to main is difficult to tune with stock needle?!! I Don’t know that point 
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
14 Oct 2024 07:17 #905088 by Maxbou92
Replied by Maxbou92 on topic One white plug
Im from Canada, Quebec.. so how we change plungers? And what kind of needle should I get ?
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
14 Oct 2024 07:33 #905090 by Wookie58
Replied by Wookie58 on topic One white plug

Humm no the plungers are the same as 1979 and stock needle too .. my guy said that pilot transition to main is difficult to tune with stock needle?!! I Don’t know that point 
The "transition" is around the point where you are "lean" - "Dynojet" needles may help this but I don't know for sure unless any other members have fitted the "Dynojet" parts and can comment ??
1982 KZ1000 Ltd
www.kzrider.com/forum/11-projects/617631...-82-begins?start=192
kzrider.com/filebase-alias?view=download...d-fault-diagnosis&ca

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.