KZR's Bikes of the Month for 2024

Petcock identification

More
14 Aug 2024 19:06 #903284 by Fox
Petcock identification was created by Fox
Hello,
i would like to know if someone kwon the bike where this petcock have to go... The fuels lines are not in the same way but make an L... 76 900LTD or 77 1000LTD ?
Thank you 
1978 KZ1000-B2 LTD
1977 kz1000-B1 LTD

Please Log in or Create an account to join the conversation.

More
14 Aug 2024 21:15 #903287 by sf4t7
Replied by sf4t7 on topic Petcock identification
 That is the same as the original one that came on my Z1A.  Mine is a "late" 1974 that had the updated VM28 carburetors, the same were used on the 1975 Z1B. (smaller carb drains being the easiest way to identify them)
I don't know if the 90 degree outlets were used on the 1973 Z1 and "early" 1974 Z1A.
Or it could just be a matter of where they were sourced from.

Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
The following user(s) said Thank You: Fox

Please Log in or Create an account to join the conversation.

  • slmjim+Z1BEBE
  • Offline
  • User
  • Enjoy Life! IT HAS AN EXPIRATION DATE!
More
15 Aug 2024 04:42 #903296 by slmjim+Z1BEBE
Replied by slmjim+Z1BEBE on topic Petcock identification
Never saw those on any unmoested Z1, Z1-A or Z1-B.  Can't vouch for KZ900's.

Good Ridin'
slmjim & Z1BEBE
A biker looks at your engine and chrome.
A Rider looks at your odometer and tags.

1973 ('72 builds) Z1 x2
1974 Z1-A x2
1975 Z1-B x2
1993 CB 750 Nighthawk x2
2009 ST1300A

www.kawasaki-z-classik.com
An enthusiast's forum focused exclusively
on all things Z1, Z2 and KZ900.

Please Log in or Create an account to join the conversation.

More
15 Aug 2024 05:08 - 15 Aug 2024 05:10 #903298 by sf4t7
Replied by sf4t7 on topic Petcock identification
As my Z1A was only 4 years old when I got it from the original owner and all his service was done at the local kawasaki dealer, I'm assuming the petcock is original or in the unlikely event that it was replaced it would have been a kawasaki part.

Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
Last edit: 15 Aug 2024 05:10 by sf4t7.

Please Log in or Create an account to join the conversation.

More
15 Aug 2024 05:48 #903301 by Warren3200gt
Replied by Warren3200gt on topic Petcock identification
Same as the one on my 77 Z1000a1.
Guess kawasaki had a few suppliers with slightly different variations. 
[img
[img
[img
[img
[img

Z1000J2 somewhat modified!
[img

The following user(s) said Thank You: sf4t7, Fox

Please Log in or Create an account to join the conversation.

  • hardrockminer
  • Offline
  • Sustaining Member
More
15 Aug 2024 07:42 #903307 by hardrockminer
Replied by hardrockminer on topic Petcock identification
I have only see the two outlet side by each version on Z1's of all years.  But I've seen the right angle version and assumed it came on other models.
I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.

Please Log in or Create an account to join the conversation.

More
15 Aug 2024 10:10 #903312 by sf4t7
Replied by sf4t7 on topic Petcock identification
Maybe mine had been swapped with another model before I owned it, but I assumed it was original because it was 4 years old and otherwise all stock when I got it. It didn't get "molested" until after I owned it for a few seasons.

Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion

Please Log in or Create an account to join the conversation.

More
15 Aug 2024 10:20 #903313 by Mcdroid
Replied by Mcdroid on topic Petcock identification
When Jeff Saunders owned Z1Enterprises, I attempted to purchase petcock gasket kits for my Z2A and my KZ1000's and Jeff stated that is was difficult to know which kit to sell me as there was apparently mix and matching of petcocks done by Kawasaki even within a year model. 
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
The following user(s) said Thank You: sf4t7

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
15 Aug 2024 16:52 #903319 by SWest
Replied by SWest on topic Petcock identification
Looks like a KZ900 LTD petcock.
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
The following user(s) said Thank You: slmjim+Z1BEBE, sf4t7, Fox

Please Log in or Create an account to join the conversation.

More
16 Aug 2024 03:00 #903325 by asphalt900
Replied by asphalt900 on topic Petcock identification
Yes, LTD 1000 perhaps LTD900.
The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.