Identity help

gd4now
Offline
User
Denco where did you go?

09 Feb 2023 12:11 #879951 by gd4now

Replied by gd4now on topic Identity help

Thanks for the additional pics, but for the life of me (old eyes) can not tell if that is a air screw head in the last pic or a plug or non-drilled passage? Will say if they are from a Suzuki the ID stamped on them will begin with the number 4.

1977 KZ650 B1
Pods and Denco header

OLD KAW OWNERS SMILE ALOT

Please Log in or Create an account to join the conversation.

Warren3200gt
Offline
User

09 Feb 2023 12:29 #879952 by Warren3200gt

Replied by Warren3200gt on topic Identity help

Zoom in from previous pic looks like airscrew to me.

Z1000J2 somewhat modified!

Please Log in or Create an account to join the conversation.

Kawboy74
Offline
User

09 Feb 2023 12:56 #879954 by Kawboy74

Replied by Kawboy74 on topic Identity help

I'm wondering if they are from a '78 Z1R as they had that type of adjuster rod between 2&3 carb and a single inlet line?

1974 Z1A As original as I could get it
'88 ZX750R braided lines, mostly original
KZ1000 project on the bench
Burlington,Ontario,Canada

Please Log in or Create an account to join the conversation.

carksz1b
Offline
User

09 Feb 2023 13:08 #879955 by carksz1b

Replied by carksz1b on topic Identity help

looks like 78 z1r 28s

Please Log in or Create an account to join the conversation.

Mikaw
Offline
Sustaining Member

09 Feb 2023 14:44 #879963 by Mikaw

Replied by Mikaw on topic Identity help

I really don’t think they are 28mm the spigot wall thickness makes me think 26mm.

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

Please Log in or Create an account to join the conversation.

Mikaw
Offline
Sustaining Member

09 Feb 2023 14:53 #879964 by Mikaw

Replied by Mikaw on topic Identity help

Here’s the same set, incomplete but the same speed adjuster, vacuum port on number 3 air pilots. I bet they measured the engine spigot and got over 26mm as they should and are calling them 27mm. I’m sticking with my Canadian kz1000A3 26mm

evilbay item number 374432243438

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

The following user(s) said Thank You: 78kawltd

Please Log in or Create an account to join the conversation.

Mikaw
Offline
Sustaining Member

09 Feb 2023 15:01 #879965 by Mikaw

Replied by Mikaw on topic Identity help

For comparison, here is a set of 28mm with pump but that doesn’t change the outlet spigot. Look at the wall thickness and compare to the OP.

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

Mikaw
Offline
Sustaining Member

09 Feb 2023 15:05 #879966 by Mikaw

Replied by Mikaw on topic Identity help

OP on the left, known 28mm on the right. No way the OP set is 28mm!

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

Please Log in or Create an account to join the conversation.

zed1015
Away
User

09 Feb 2023 16:04 - 10 Feb 2023 09:17 #879970 by zed1015

Replied by zed1015 on topic Identity help

Those carbs ARE VM26SS.
The outlet on #3 carb is for a vacuum fuel tap so rules out all pre 1978 900's and 1000's as they all had manual fuel taps.
With the idle adjuster position underneath they are most likely 1978 Z1000A2 which had VM26SS and a vac tap unless they have both fuel and air mix screws which would make them Suzuki GS.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-

Last edit: 10 Feb 2023 09:17 by zed1015.

Please Log in or Create an account to join the conversation.

78kawltd
Topic Author
Offline
Sustaining Member
1978 B2, 06 Heritage Softail,

09 Feb 2023 17:03 #879971 by 78kawltd

Replied by 78kawltd on topic Identity help

Thank you kzriders. Due diligence x2. Thanks.
I have an inquiry into the seller from this afternoon.
Have Not heard back yet.
I asked; There should be an ID stamped below the choke lever or on the same flange on the outside of #4 carb that may help to ID the set of carbs. Can you check please ?

Please Log in or Create an account to join the conversation.

Mikaw
Offline
Sustaining Member

09 Feb 2023 18:04 #879973 by Mikaw

Replied by Mikaw on topic Identity help

Just request the ID measurement of the engine side spigot. More than 26 less then 27 you know they are VM26SS. More than 28 less than 29 they are VM28SS, but they aren’t.

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

Please Log in or Create an account to join the conversation.

gd4now
Offline
User
Denco where did you go?

10 Feb 2023 09:05 #879986 by gd4now

Replied by gd4now on topic Identity help

I look forward to what you may or may not learn from the seller.

1977 KZ650 B1
Pods and Denco header

OLD KAW OWNERS SMILE ALOT

Please Log in or Create an account to join the conversation.

KZR's Bikes of the Month for 2024

Identity help

If you like KZR Please consider making a donation. Thank you.