KZR's Bikes of the Month for 2024

rotor tool (alternator act) kawa part no 57001-308

  • Randombeat
  • Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
More
18 Apr 2015 19:57 #668609 by Randombeat
rotor tool (alternator act) kawa part no 57001-308 was created by Randombeat
FSM says I need this tool to hold the alternator rotor while I turn the secondary shaft but loose... I already order the flywheel puller bolt, but do I need the rotor tool also? I can't find one anywhere... *bangs head*


Attachment 1429411689809905573440.jpg not found

1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style
Attachments:

Please Log in or Create an account to join the conversation.

  • gd4now
  • Offline
  • User
  • Denco where did you go?
More
19 Apr 2015 00:27 #668633 by gd4now
Replied by gd4now on topic rotor tool (alternator act) kawa part no 57001-308
You do need to hold it from spinning some how. You might be able to do so with a strap wrench.
1977 KZ650 B1
Pods and Denco header

OLD KAW OWNERS SMILE ALOT
The following user(s) said Thank You: Randombeat

Please Log in or Create an account to join the conversation.

  • CoreyClough
  • Offline
  • User
  • GPz550 Addiction
More
19 Apr 2015 06:44 - 19 Apr 2015 06:47 #668648 by CoreyClough
Replied by CoreyClough on topic rotor tool (alternator act) kawa part no 57001-308
No eBay APP ID and/or Cert ID defined in Kunena configurationI saw one of these tools on Ebay a few years back, and scooped it up. I have not seen one since. Seriously, someone needs to remake something like this, it doesn't look that difficult. If you find one, buy it! I have only seen something like this, but have no experience using it.
'85 GPz550(ZX550-A2)

GPz550 Base Manual --> tinyurl.com/ze5b3qo
GPz550 Supplement Manual --> tinyurl.com/h34d2o6
GPz550.com --> www.nwsca.com/scripts/gpz_forum_2005/default.asp
First Race Win GPz550 --> tinyurl.com/o5y3ftp
Last edit: 19 Apr 2015 06:47 by CoreyClough. Reason: spelling
The following user(s) said Thank You: !Seymore, Randombeat

Please Log in or Create an account to join the conversation.

More
19 Apr 2015 08:24 - 19 Apr 2015 08:26 #668663 by 650ed
Replied by 650ed on topic rotor tool (alternator act) kawa part no 57001-308
.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 19 Apr 2015 08:26 by 650ed.

Please Log in or Create an account to join the conversation.

  • Randombeat
  • Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
More
19 Apr 2015 08:32 #668667 by Randombeat
Replied by Randombeat on topic rotor tool (alternator act) kawa part no 57001-308

650ed wrote: .


Im glad you saw this, I was just about to link you to it in my other thread..
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

  • Tyrell Corp
  • Offline
  • User
  • "You were made as well as we could make you"
More
19 Apr 2015 09:54 #668680 by Tyrell Corp
Replied by Tyrell Corp on topic rotor tool (alternator act) kawa part no 57001-308
I used a Honda CB750 rear wheel spindle to force the rotor off, not sure of the thread but it came off easy enough. Locking the back wheel in gear will hold the rotor. Obvious, but never use a hammer on this!

I used some fine grinding paste to lap the crank nose taper/rotor, a good finishing touch.
1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces
The following user(s) said Thank You: Randombeat

Please Log in or Create an account to join the conversation.

  • Randombeat
  • Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
More
19 Apr 2015 10:17 #668685 by Randombeat
Replied by Randombeat on topic rotor tool (alternator act) kawa part no 57001-308

Tyrell Corp wrote: I used a Honda CB750 rear wheel spindle to force the rotor off, not sure of the thread but it came off easy enough. Locking the back wheel in gear will hold the rotor. Obvious, but never use a hammer on this!

I used some fine grinding paste to lap the crank nose taper/rotor, a good finishing touch.


Thanks for the info! I'm doing the starter clutch, bike is an 1980 kz750h1 ltd. I don't think I need to actually pull the rotor, I just need to prevent it from turning while I try to loosen the secondary shaft nut...
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
19 Apr 2015 10:47 #668687 by DoctoRot
Replied by DoctoRot on topic rotor tool (alternator act) kawa part no 57001-308
put it in 5th gear and have someone step on the rear brake. Or you can pull the clutch cover and hold the clutch basket with a clutch wrench. EBC makes those.
'78 1000 Long Term Project
 '80 750G
 750 Twin Big Bore Track Bike
Attachments:

Please Log in or Create an account to join the conversation.

More
19 Apr 2015 13:19 #668716 by 650ed
Replied by 650ed on topic rotor tool (alternator act) kawa part no 57001-308

Randombeat wrote:

650ed wrote: .


Im glad you saw this, I was just about to link you to it in my other thread..


Take a look at the 2 links below. I believe they each contain information that should be helpful to you as you tackle the starter clutch. Ed

forums.kz650.info/index.php?action=dlatt...pic=586.0;attach=873

forums.kz650.info/index.php?topic=5152.0
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Randombeat
  • Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
More
19 Apr 2015 15:14 #668736 by Randombeat
Replied by Randombeat on topic rotor tool (alternator act) kawa part no 57001-308

650ed wrote:

Randombeat wrote:

650ed wrote: .


Im glad you saw this, I was just about to link you to it in my other thread..


Take a look at the 2 links below. I believe they each contain information that should be helpful to you as you tackle the starter clutch. Ed

forums.kz650.info/index.php?action=dlatt...pic=586.0;attach=873



forums.kz650.info/index.php?topic=5152.0


Thanks ed. The first link, I get the download, but it says can't open file.. Maybe its the tablet I'm on? Could you email it to randombeat@gmail.com ?

Thanks again
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

More
19 Apr 2015 15:32 #668746 by 650ed
Replied by 650ed on topic rotor tool (alternator act) kawa part no 57001-308
I sent it. It's a PDF file. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: Randombeat

Please Log in or Create an account to join the conversation.

  • Randombeat
  • Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
More
19 Apr 2015 15:53 #668750 by Randombeat
Replied by Randombeat on topic rotor tool (alternator act) kawa part no 57001-308

650ed wrote: I sent it. It's a PDF file. Ed


Can't thank you enough ed, this PDF is what I originally read, and makes no mention of any special tools. Just walls and broom handles lol.
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.