Carb Stand from old carb holders.

loudhvx
Topic Author
Offline
KZr Legend

24 Nov 2016 07:55 #748830 by loudhvx

Replied by loudhvx on topic Carb Stand from old carb holders.

Very nice on both of those.
Steve, that must get you some questions.

1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.

The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

SWest
Offline
Sustaining Member
10 22 2014

24 Nov 2016 07:59 #748831 by SWest

Replied by SWest on topic Carb Stand from old carb holders.

loudhvx wrote: Very nice on both of those.
Steve, that must get you some questions.

No one has asked yet. Maybe they're afraid of the answer. :woohoo:
Steve

Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

loudhvx
Topic Author
Offline
KZr Legend

24 Nov 2016 08:22 #748834 by loudhvx

Replied by loudhvx on topic Carb Stand from old carb holders.

:laugh: could be.

1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.

Please Log in or Create an account to join the conversation.

rstnick
Offline
User

26 Nov 2016 06:02 - 26 Nov 2016 06:05 #748956 by rstnick

Replied by rstnick on topic Carb Stand from old carb holders.

Thanks for all the ideas on making a stand.
I used some wood I had laying around.
I don't have a garage, just some work space In the basement.
I wanted my carb stand portable, so I can take it outside.

Also gave the carbs a bath.

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project

Last edit: 26 Nov 2016 06:05 by rstnick.

Please Log in or Create an account to join the conversation.

JR
Offline
Sustaining Member

26 Nov 2016 06:16 #748960 by JR

Replied by JR on topic Carb Stand from old carb holders.

Also gave the carbs a bath.

Very cute !

1980 kz750E1, Delkevic exhaust

Please Log in or Create an account to join the conversation.

BOOM_FIST
Offline
User

29 Nov 2016 07:29 #749143 by BOOM_FIST

Replied by BOOM_FIST on topic Carb Stand from old carb holders.

I did the same. Unfortunately, I built it with old Mikuni VM26 holders...and when I tried to slap the Keihin 29's on it....DOH! Dumb new guy.

1977 KZ900A5

Attachments:

Please Log in or Create an account to join the conversation.

martin_csr
Offline
User

01 Dec 2016 05:05 - 01 Dec 2016 05:36 #749217 by martin_csr

Replied by martin_csr on topic Carb Stand from old carb holders.

Carb stand. by removing the horizontal 2x4, it also functions as an engine block/stand which was its original use when I refurbished the front end.

The stand is two 2x4s screwed together then fastened to a 2x8. the carb holder part is a 2x4 w a couple of L brackets to support the carburetors & 2 lag screws to offset the carbs so they'll be level. plus a bungee cord to make sure they stay in place. the natural tendency of vm24 carbs is to lean against the horizontal board.

1981 KZ650 Competition Sports and Road

Last edit: 01 Dec 2016 05:36 by martin_csr.

Please Log in or Create an account to join the conversation.

SWest
Offline
Sustaining Member
10 22 2014

01 Dec 2016 06:17 #749227 by SWest

Replied by SWest on topic Carb Stand from old carb holders.

Good tank jig. After 40 years being a carpenter, I never made a table like that :S . :huh: Brought home mountains of lumber but never thought of it. Nice.