- Posts: 522
- Thank you received: 306
Z650 / 1170 Project
- Wheelhop
-
- Offline
- Sustaining Member
- 750 R1
-
- Offline
- User
- Bevelhead
- Topic Author
- Offline
- User
12 Mar 2022 07:16 #863624
by Bevelhead
Replied by Bevelhead on topic Z650 / 1170 Project
I was tempted to fit the Z650 badges, but went for a Z1 style side panel badges, but just a little different. While knocking the roll pin in the filler cap without damaging the paint was nerve wracking to say the least.
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- User
12 Mar 2022 08:34 #863633
by rstnick
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Replied by rstnick on topic Z650 / 1170 Project
Looking great!
I just replaced the gas cap on my tank and felt the same way.
I just replaced the gas cap on my tank and felt the same way.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Please Log in or Create an account to join the conversation.
- 750 R1
-
- Offline
- User
12 Mar 2022 13:58 #863664
by 750 R1
Use some painters tape, tape up around the cap area with a couple of layers of tape, a little insurance when fitting the roll pins... If you're really bad with tools, get a piece of plastic ice cream container and cut it to fit around the cap then tape it up....
Replied by 750 R1 on topic Z650 / 1170 Project
Looking great!
I just replaced the gas cap on my tank and felt the same way.
Use some painters tape, tape up around the cap area with a couple of layers of tape, a little insurance when fitting the roll pins... If you're really bad with tools, get a piece of plastic ice cream container and cut it to fit around the cap then tape it up....
Please Log in or Create an account to join the conversation.
- 750 R1
-
- Offline
- User
- 750 R1
-
- Offline
- User
- Bevelhead
- Topic Author
- Offline
- User
20 May 2022 14:51 #867410
by Bevelhead
Replied by Bevelhead on topic Z650 / 1170 Project
After a pause of a couple of months, rolled the bike out on the drive and made a start. Fitted the badging on the RHS and fitted the ZX6R rear brake light. Still need to bend its alloy mounting bracket so the number plate is angled out a bit. Then it'll have to be given a tough black finish, either Cerokote or hard anodised. In the pic the ducktail isnt bolted down yet.
Please Log in or Create an account to join the conversation.
- Scirocco
-
- Offline
- Premium Member
- Never change a running system
- Bevelhead
- Topic Author
- Offline
- User
20 May 2022 16:26 #867417
by Bevelhead
Replied by Bevelhead on topic Z650 / 1170 Project
Because the gearbox sprocket outrigger support inner plate isn't fitted, so as soon as I moved the bike off its paddock stand, I knew it would leak a bit more expensive oil over my drive, hence all the cardboard under the bike..
One off inner plate that was not fitted.. its needs a thicker gasket, which is unique, I've made one, but not tried it out yet.
This is how it looks on the bike..
One off inner plate that was not fitted.. its needs a thicker gasket, which is unique, I've made one, but not tried it out yet.
This is how it looks on the bike..
Please Log in or Create an account to join the conversation.
- Bevelhead
- Topic Author
- Offline
- User
27 May 2022 02:09 #867731
by Bevelhead
Replied by Bevelhead on topic Z650 / 1170 Project
Took a few parts from the 1170 and my Z1400 Mk2 project to Camcoat (a local specialist) to be ceramically anodised, 2 or 3 week turnaround. So decided just to paint the rear light bracket for now in so called 'Tough Paint' not sure how tough it really is, but it'll do for now. Meanwhile, got a frame arriving today which will be the start of a new Zed project .
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.