KZR's Bikes of the Month for 2024

Katit's 1978 KZ650 project

More
06 Sep 2022 21:02 #873488 by Skidmark
Replied by Skidmark on topic Katit's 1978 KZ650 project
I think it was a 1/8" NPT.  Measure the hole in the head, and compare it to the NPT tap drill sizes.
Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)
The following user(s) said Thank You: Gdailey2112

Please Log in or Create an account to join the conversation.

More
07 Sep 2022 03:26 #873495 by zed1015
Replied by zed1015 on topic Katit's 1978 KZ650 project


what size tap and plug did u use?
When i do them i tap them M10 .
The hole is already the correct size for tapping.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.