1977 1000A?

menace
Topic Author
Offline
User

07 Mar 2018 07:27 - 07 Mar 2018 07:29 #779865 by menace

Replied by menace on topic 1977 1000A?

Attachments:

Last edit: 07 Mar 2018 07:29 by menace.

Please Log in or Create an account to join the conversation.

z19OO
Offline
User

07 Mar 2018 08:04 #779868 by z19OO

Replied by z19OO on topic 1977 1000A?

Def a 77 1000. You can tell by the caliper towards the front and the passenger peg mounts. Good luck with it!

1975 z1 900
1979 kz650b

Please Log in or Create an account to join the conversation.

menace
Topic Author
Offline
User

07 Mar 2018 14:15 #779875 by menace

Replied by menace on topic 1977 1000A?

Thank you sir i appreciate it. i am mostly worried about the engine on it especially after finding that cam chain guide in the bottom of the motor. i just priced all the top end APE parts with gaskets im looking at about 600 dollars to replace everything with a complete Athena gasket kit. I am hoping that i will not have to replace the cam chain and i will have about 100 dollars in machine work for the valves and hone job.

Please Log in or Create an account to join the conversation.

KZB2 650
Offline
User

07 Mar 2018 14:45 #779876 by KZB2 650

Replied by KZB2 650 on topic 1977 1000A?

Before you pick up the Athena gasket set please search and wait for a few reviews on them around here.

1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.

The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

SWest
Offline
Sustaining Member
10 22 2014

07 Mar 2018 17:19 #779884 by SWest

Replied by SWest on topic 1977 1000A?

You won't regret the Liska rollers. They should last a lifetime. Athena gaskets seem to be sub par. I use a one piece head gasket. The O ring doesn't last. The aftermarket ones even less so. With quality parts you should be able to RIDE THE PISS OUT OF IT. :woohoo:
Steve

Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

menace
Topic Author
Offline
User

07 Mar 2018 17:30 #779885 by menace

Replied by menace on topic 1977 1000A?

Ok I will not get the Athena gasket set. Would I be ok with cometic? I know building anything on a budget is a bad idea and that most stock gaskets are always better so I am mostly worried about the head gasket valve stem seals and cylinder base gaskets. So should I just get stock shit or is cometic ok? I still have to get a shop manual and check the valve clearance.

Please Log in or Create an account to join the conversation.

bluej58
Offline
Sustaining Member
The chrome don't get you home

07 Mar 2018 17:53 #779886 by bluej58

Replied by bluej58 on topic 1977 1000A?

No eBay APP ID and/or Cert ID defined in Kunena configurationI got this set last spring and have only used the upper split cylinder gaskets , the cam chain O ring and the cam cover gasket and they are holding up fine .
Going to get into the lower stuff real soon
Good kit IMO from the mother country for not a lot of money
1 set left

78 KZ1000 A2A

Please Log in or Create an account to join the conversation.

Nessism
Offline
Sustaining Member

07 Mar 2018 17:55 #779887 by Nessism

Replied by Nessism on topic 1977 1000A?

If you click "insert" when uploading photos they show up in high resolution.

Athena gaskets suck. Stay clear of any green gaskets.

Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

bluej58
Offline
Sustaining Member
The chrome don't get you home

07 Mar 2018 18:23 - 07 Mar 2018 18:24 #779890 by bluej58

Replied by bluej58 on topic 1977 1000A?

So my lower cylinder gasket is probably garbage?

78 KZ1000 A2A

Attachments:

Last edit: 07 Mar 2018 18:24 by bluej58.

Please Log in or Create an account to join the conversation.

SWest
Offline
Sustaining Member
10 22 2014

07 Mar 2018 19:16 #779896 by SWest

Replied by SWest on topic 1977 1000A?

Yup. Spending all that money and cheap gaskets? Been using Cometic for years. No complaints.
Steve

Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

menace
Topic Author
Offline
User

07 Mar 2018 20:06 #779902 by menace

Replied by menace on topic 1977 1000A?

Then cometic it is. Thanks for the heads up guys. I'm still trying to figure out what oring and hole you guys are talking about filling in with sealer. Sorry I know I should know this but I have not had one of these top ends apart in 13 years and I hardly remember.

Please Log in or Create an account to join the conversation.

SWest
Offline
Sustaining Member
10 22 2014

07 Mar 2018 20:21 #779904 by SWest

Replied by SWest on topic 1977 1000A?

If you decide to go one piece, we'll guide you through. If not get New OEM O rings not aftermarket. Mine failed the first year.
Steve

Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

KZR's Bikes of the Month for 2024

1977 1000A?

If you like KZR Please consider making a donation. Thank you.