KZR's Bikes of the Month for 2024

ZR750C Moriwaki Endurance Racer

More
23 Sep 2016 06:47 - 23 Sep 2016 06:48 #743300 by 531blackbanshee
Replied by 531blackbanshee on topic ZR750C Moriwaki Endurance Racer
i have bought a to put a busa front end on a cb750.
so i am familiar with the wedge lock but had never seen the sliding cylinder type clamping system of your triple.
this bike is very nicely done.

how does this mount not turn with the turning steering stem ????

leon

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Attachments:
Last edit: 23 Sep 2016 06:48 by 531blackbanshee.
The following user(s) said Thank You: kretchman

Please Log in or Create an account to join the conversation.

More
23 Sep 2016 07:03 - 23 Sep 2016 07:23 #743304 by kretchman
Replied by kretchman on topic ZR750C Moriwaki Endurance Racer
There's a bearing recessed in the clamp to the fairing stay so the stem can rotate independently of the mount. You can see the grub screw that holds the outer race of the bearing in.

Yeah I like the design, I'm not sure it provides as much "clamping" strength as a traditional as it's effectively a point load on either side of the tube. Should provide the same strength as the wedge type would, Will see if there's any flex between the top and bottom yokes during testing, but I doubt there will be.

BTW that cognito moto is amazingly clean. Would love to see pics of the CB with the busa front.

There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
Last edit: 23 Sep 2016 07:23 by kretchman.

Please Log in or Create an account to join the conversation.

More
23 Sep 2016 07:56 #743308 by 531blackbanshee
Replied by 531blackbanshee on topic ZR750C Moriwaki Endurance Racer
a bearing makes sense now,your buddy is a tricky lil feller now ain't he!?!?!
the cognito stuff is very nice and reasonably priced.cheaper than me making it and sweating the details.i can just buy theres and then mod it for bars gauges etc.
the cb isn't much to look at yet.i still have swingarm to build,seat pan tail piece to fab etc.it's getting a list of motogadget goodies,c-5 ignition, some posh switches with an acewell,and one of carpy's yosh replica headers painted black.
i'll have to post pics as i get further along

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
23 Sep 2016 08:51 #743312 by kretchman
Replied by kretchman on topic ZR750C Moriwaki Endurance Racer
He certainly is, and would be very pleased to hear that. Some really nice details he's put in, and I'm pretty particular but he just takes it that little bit further :)

Yeah the cognito stuff is great, but shipping to Australia is killer, hence the need to locally fab a lot of stuff. That sounds like a sweet little package for the CB :)

There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.

Please Log in or Create an account to join the conversation.

More
23 Sep 2016 12:35 #743324 by 531blackbanshee
Replied by 531blackbanshee on topic ZR750C Moriwaki Endurance Racer
i get the shipping deal.
i have shipped parts all over the globe,except to Australia.
just sent some 58 vette parts to sweden for kzr member arnold

i prefer custom built parts :evil: !

my motto,
"make what ya can,save the rest"

leon

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
23 Sep 2016 15:08 - 23 Sep 2016 15:17 #743331 by 750 R1
Replied by 750 R1 on topic ZR750C Moriwaki Endurance Racer

kretchman wrote: Yeah it's pretty clean. The cam lock action holds the tube up top, and the traditional bottom yoke does the heavy lifting so to speak. There's a few designs out there for a similar setup with adjustable steering head angle etc.

Attachment Capture.JPG not found


Yep, I just had a set of clamps made up for a Honda project that have the same cam system on the top clamp, very clean and works great, my set up is similar to Black Banshee's... ;)

Re shipping, I get stuff shipped from the States regularly, even with the shipping cost, most things ends up cheaper than being made here, I've shipped suspension parts including forks, wheel sets, custom throttle bodies, triple clamps, engine blocks, piston kits, 4 into 1's and piles of other stuff, manufacturing costs in the USA blow Aussie prices out of the water.... ;)
Last edit: 23 Sep 2016 15:17 by 750 R1.

Please Log in or Create an account to join the conversation.

More
25 Sep 2016 22:56 #743567 by kretchman
Replied by kretchman on topic ZR750C Moriwaki Endurance Racer
Post paint assembled and exhaust done. Just waiting on my forks to come back and then it's a roller!

Attachment 14438741_10210641373410158_1476225413_o.jpg not found



Then wire and tune and test ride!

There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
Attachments:

Please Log in or Create an account to join the conversation.

More
26 Sep 2016 03:16 - 26 Sep 2016 03:22 #743573 by 750 R1
Replied by 750 R1 on topic ZR750C Moriwaki Endurance Racer
That is one sexy bit of gear, exactly the sort of bike that gets my juices flowing, very nice work... ;)

This isn't a criticism, just an observation, In my opinion the bike would look perfect with a squarer, Z1000MK2 tank, you can actually by them to suit the Zephyr frame too.... B) {just being picky, Ignore me}...
Last edit: 26 Sep 2016 03:22 by 750 R1.

Please Log in or Create an account to join the conversation.

More
26 Sep 2016 05:04 #743577 by kretchman
Replied by kretchman on topic ZR750C Moriwaki Endurance Racer
Funny you mention that, I spent ages looking for a z1000 tank and the prices were eye watering, so I went with what I had.

I would prefer a squarer tank, but I think as it is, the lines from different angles flow well enough for me. Different shades on the paint highlight the angles too, but it's such a small issue that I'm happy to live with it :)

Front end in soon! Stay tuned.

There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.

Please Log in or Create an account to join the conversation.

More
26 Sep 2016 06:32 #743588 by kretchman
Replied by kretchman on topic ZR750C Moriwaki Endurance Racer
A few more pics of the exhaust setup

Attachment 14480767_1294197090625249_1316646570657158610_o.jpg not found



Attachment 14440784_1294309567280668_4238687672474187334_n.jpg not found



Attachment 14455720_10210641409371057_1597097518_o.jpg not found


There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
Attachments:

Please Log in or Create an account to join the conversation.

More
26 Sep 2016 06:40 #743590 by Kidkawie
Replied by Kidkawie on topic ZR750C Moriwaki Endurance Racer
Looking good! sub'd

1975 Z1 900
1994 KX250 Supermoto
2004 KX125

Please Log in or Create an account to join the conversation.

More
26 Sep 2016 17:00 - 26 Sep 2016 18:27 #743642 by 750 R1
Replied by 750 R1 on topic ZR750C Moriwaki Endurance Racer

kretchman wrote: Funny you mention that, I spent ages looking for a z1000 tank and the prices were eye watering, so I went with what I had.

I would prefer a squarer tank, but I think as it is, the lines from different angles flow well enough for me. Different shades on the paint highlight the angles too, but it's such a small issue that I'm happy to live with it :)


Just in case,

750 zephyr 750FX tank {same as z1000MK2} $600 aussie dollars, if you can buy another 50 bucks worth of parts with it, shipping is free, I could help with that, i need some parts too... ;)

japan.webike.net/products/22056216.html

PS, in case anyone else read my post earlier, I put in the wrong link...!!! :huh:
Last edit: 26 Sep 2016 18:27 by 750 R1.
The following user(s) said Thank You: kretchman

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.