KZR's Bikes of the Month for 2024

'83 KZ1000R2 - Cafe racer (take two)

More
11 Jan 2014 04:43 - 11 Jan 2014 04:45 #618213 by tommyboah
'83 KZ1000R2 - Cafe racer (take two) was created by tommyboah
I am creating a new thread for this build, as the last one was converted into more of an ethical thread than a build thread :) No hard feelings. But please let's keep it this time to discussing the build and not what bike is being used for this build. So here we go.

Firstly a little intro:

I really love Cafe Racers and I have always wanted to build my own. My first bike was a Suzuki GS400 Cafe racer that I did not build myself, but bought from a guy in Norway who builds Cafe racers based on GS400 together with this son:

Another pic


After I had been riding this bike for a while, I was interested in building my own Cafe racer and had been doing quite a lot of research. I wanted to build a bike that had a bigger engine with more power, like a 750cc or 1000cc. I had been looking at the Suzuki GS750, GS1000 and the Honda CB750s, also KZ750 and KZ1000. The market for classic bikes is not so big in Norway, as I guess it is in the US where most of you come from. Therefore it is not all that easy to actually find a bike for a build project, unless you import one from another country. After browsing through the "bike for sale"-adds in Norway for a while the one bike who caught my eye was the KZ1000R2 that I could get for a resonable price. I managed to get a fair price for the old GS400 and did not have to put all that much in upgrading to the KZ1000R2. So here we are.

The project is a '83 KZ1000R2 that has run for about 70.000km and had a shit load of different owners. Access to parts and workshops her in Norway are limited and therefore also pretty expensive. All the parts I get are bought on-line from webshops (Z1enterprise, Fast from the past, Dynoman.net etc.) or ebay.

My first sketches started out like this:

Based upon this sketch I did a qucik part conversion using the stock seat and added clip-ons, new headlight and an Acewell speedo. This was during the riding season, so I did not want to use much time on it, and just wanted to get the Cafe feel of it:


This is all I have time for writing right now. As some of you might know, I have done much more work on the bike today, and I will upadte this ASAP.

.Tommyboy
Last edit: 11 Jan 2014 04:45 by tommyboah.
The following user(s) said Thank You: KZJOE900, lightitup, 80B4

Please Log in or Create an account to join the conversation.

More
11 Jan 2014 05:09 #618215 by sbc1320
Replied by sbc1320 on topic '83 KZ1000R2 - Cafe racer (take two)
I'm not into those myself, however your first one there looked pretty good. Only thing you guys don't have much padding on them seats though(lol). Good luck with your build and give it your best.

1980 KZ1000 LTD-B4(MK II engine) - Progressive suspension, MTC pistons, Dynojet Stage III, all wear items replaced, WFO paint scheme(1978), etc..

Past bikes- 2 1976 Kz900's, 5 1975-76 Honda CB750's, Honda 500 -4, Honda 250, Honda 125, Honda 100, Suzuki RM 250, Honda XL350, Kawasaki KLR 650, etc..

Please Log in or Create an account to join the conversation.

More
11 Jan 2014 12:03 #618237 by peter1958

Please Log in or Create an account to join the conversation.

More
11 Jan 2014 12:28 #618244 by peter1958

Please Log in or Create an account to join the conversation.

More
11 Jan 2014 13:43 #618257 by 80B4
Replied by 80B4 on topic '83 KZ1000R2 - Cafe racer (take two)
I am glad to see that you are moving ahead with this project! Share lots of photos and keep us updated.

1980B4 1000
1978 Z1R
1978 B3 750

Please Log in or Create an account to join the conversation.

More
11 Jan 2014 14:43 #618269 by Kapahulu
Replied by Kapahulu on topic '83 KZ1000R2 - Cafe racer (take two)
It was perfect before you cafe-ed it.

1978 KZ1000, 1976 KZ900, 1975 H2, 1973 H1, 1973 H2, 1978 RD400, 1977 RD400, 1974 RD350
2strokeworld.com
The following user(s) said Thank You: 650ed, peter1958, LarryC, EdwidjR

Please Log in or Create an account to join the conversation.

  • guitargeek
  • Offline
  • User
  • Elitist, arrogant, intolerant, self absorbed.
More
11 Jan 2014 16:04 #618277 by guitargeek
Replied by guitargeek on topic '83 KZ1000R2 - Cafe racer (take two)

Kapahulu wrote: It was perfect before you cafe-ed it.

Can't un-ring that bell.

Go Tommy!

1980 KZ750-H1 (slightly altered)
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
The following user(s) said Thank You: tommyboah

Please Log in or Create an account to join the conversation.

More
12 Jan 2014 01:55 #618312 by tommyboah
Replied by tommyboah on topic '83 KZ1000R2 - Cafe racer (take two)

peter1958 wrote: The front fender does not look right on it anymore.


I agree that the fender did not look right. I have shortened it a bit. This beeing the original fender:'

And this being after:

I have used the two cut-off parts and welded them together to make a hugger/fender for the rear swing arm:

.Tommyboy

Please Log in or Create an account to join the conversation.

More
12 Jan 2014 08:25 #618327 by tommyboah
Replied by tommyboah on topic '83 KZ1000R2 - Cafe racer (take two)
Before I go on with more pics, here are my initial plans for this build:

- Tearing down engine compeletely and having it meda blasted and re-painted. I will do a combo of black and silver on the engine.
- Sandblasting the frame and having it powder coated (black semi-gloss)
- Painting tank, seat and fenders black with some white racing stripes
- Rebuilding engine with Wiseco big bore kit (72.0mm) to 1075ccm with new valves and guides
- Replacing front and rear drive train sprocket along with new 630 chain
- Changing the carbs from stock CV to Mikuni RS36 with K&N pod filters
- Change to Dyna S ignition with Dynca Coils (I am keeping the option of running the stock ignition)
- Changed fork stanchions (as they were shot) and springs to Hagon Progressive. Also putting on a fork brace.
- Changed rear suspension to progressive suspension, was thinking of Öhlins but I have to save up for that
- Installing hydraulic clutch system from Z1 Enterprises
- Replacing all bearings in stem and swing arm
- Replaced the stock Kerker baffle with 2" competition baffle
- Clip ons (that one was obvious?) and rear set installation
- Replacing front master cylinder and all brake lines with new and improved ones
- Fresh rubber on all wheels

Some non performance, but still cool addons:
- Acewell speedo/tacho
- Keyless ignition (RF-id based)
- LED blinkers

Wanted upgrade (stage 2):
- Brakes, I will need to see how they perform now after switching to new front master cylinder and brake lines.
- Front and rear assemblies of a ZRX (i hear that this is not to difficult to fit together)

.Tommyboy
The following user(s) said Thank You: 80B4

Please Log in or Create an account to join the conversation.

More
13 Jan 2014 06:28 #618405 by 80B4
Replied by 80B4 on topic '83 KZ1000R2 - Cafe racer (take two)
RaceTech is making some nice shocks. They are worth a look too!

www.racetech.com/page/id/98

1980B4 1000
1978 Z1R
1978 B3 750

Please Log in or Create an account to join the conversation.

More
13 Jan 2014 07:37 #618411 by KZJOE900
Replied by KZJOE900 on topic '83 KZ1000R2 - Cafe racer (take two)

Tommyboah@gmail.com wrote: Before I go on with more pics, here are my initial plans for this build:

- Tearing down engine compeletely and having it meda blasted and re-painted. I will do a combo of black and silver on the engine.
- Sandblasting the frame and having it powder coated (black semi-gloss)
- Painting tank, seat and fenders black with some white racing stripes
- Rebuilding engine with Wiseco big bore kit (72.0mm) to 1075ccm with new valves and guides
- Replacing front and rear drive train sprocket along with new 630 chain
- Changing the carbs from stock CV to Mikuni RS36 with K&N pod filters
- Change to Dyna S ignition with Dynca Coils (I am keeping the option of running the stock ignition)
- Changed fork stanchions (as they were shot) and springs to Hagon Progressive. Also putting on a fork brace.
- Changed rear suspension to progressive suspension, was thinking of Öhlins but I have to save up for that
- Installing hydraulic clutch system from Z1 Enterprises
- Replacing all bearings in stem and swing arm
- Replaced the stock Kerker baffle with 2" competition baffle
- Clip ons (that one was obvious?) and rear set installation
- Replacing front master cylinder and all brake lines with new and improved ones
- Fresh rubber on all wheels

Some non performance, but still cool addons:
- Acewell speedo/tacho
- Keyless ignition (RF-id based)
- LED blinkers

Wanted upgrade (stage 2):
- Brakes, I will need to see how they perform now after switching to new front master cylinder and brake lines.
- Front and rear assemblies of a ZRX (i hear that this is not to difficult to fit together)


Very nice Tommy. Sounds like you will have a new bike once you are done. If you are replacing the chain and front and rears sprockets, I would look into converting to a 530 chain when you do it. Much lighter than the big 630 battle ship anchor chain. Definitely go with stainless steel braided brake lines. You can get them with a black or clear sheathing. Will be the single most important change you can make to your stock brakes, If you go to a new modern style caliper and M/C I would assume they would come with the SS lines. But even if you keep your stock components, it will drastically improve your brakes. Not saying it will do stoppies. But a big improvement.

Current project 76 KZ900 (This was a Vetter model)
76 KZ900
81 XJ550H SECA (Current Project)
82 XJ550R SECA
Past:
86 FJ1200
74 Z1900
72 CB450

Please Log in or Create an account to join the conversation.

More
21 Jan 2014 10:54 - 21 Jan 2014 10:56 #619455 by peter1958
Replied by peter1958 on topic '83 KZ1000R2 - Cafe racer (take two)
- Changing the carbs from stock CV to Mikuni RS36 with K&N pod filters Just re read this again and those carbs are to big for this build
Last edit: 21 Jan 2014 10:56 by peter1958. Reason: cause

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.