KZ 750 P1 scrambler
- Puffin
-
- Offline
- User
- yeekim
-
Topic Author
- Offline
- User
- kzz1king
-
- Offline
- User
- yeekim
-
Topic Author
- Offline
- User
26 Jan 2014 13:21 #620127
by yeekim
Please Log in or Create an account to join the conversation.
- yeekim
-
Topic Author
- Offline
- User
10 May 2015 07:55 #671360
by yeekim
Ex nihilo nihil fit!
Replied by yeekim on topic KZ 750 P1 scrambler
Hi!
After a successful seasons, decided to make this to my primary ride, while the choppers engine is "on the table"
Thought that a quick compression test is OK and........
2'nd cyl showed 0
Time+tools =bent inlet valve
A new valve from donor, some work and leak test and voilaa :laugh:
After a successful seasons, decided to make this to my primary ride, while the choppers engine is "on the table"
Thought that a quick compression test is OK and........
2'nd cyl showed 0
Time+tools =bent inlet valve
A new valve from donor, some work and leak test and voilaa :laugh:
Ex nihilo nihil fit!
Please Log in or Create an account to join the conversation.
- yeekim
-
Topic Author
- Offline
- User
01 Sep 2015 11:11 #688185
by yeekim
Ex nihilo nihil fit!
Replied by yeekim on topic KZ 750 P1 scrambler
So the scrambler was my primary ride during chopper conversion works.
Changed the main jet to 120, raised the jet needle and made a bigger hole in slide and it's riding smooooth
Changed the main jet to 120, raised the jet needle and made a bigger hole in slide and it's riding smooooth
Ex nihilo nihil fit!
Please Log in or Create an account to join the conversation.
- yeekim
-
Topic Author
- Offline
- User
- SWest
-
- Offline
- Sustaining Member
- 10 22 2014
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.