KZ 1000 Team Green

Got the rest of bike tore down today. Got the terd out and will start cleaning it up and do some inspection on it. Not much will happen until school break in a couple weeks.

Not sure whats going on, but my pics. are posting sideways. LOL

having some nice work space makes getting projects done alot better.

leon

Yes it is a great space. Trying to get some Money together to put a garage heater in, it cold in there. LOL

i get alot of use out of one of the
www.amazon.com/Mr-Heater-Single-Tank-Top...rds=mr+heater+indoor

it is good for heating the "area" you are working in.
it uses the tank off a gas grill(which most folks already have and don't use so much when it's cold)
and is affordable enough until you can spring for climate control.

i have two of them and am glad of it.
leon

He is from Minnesota Leon. I would not doubt if he has a sunflower head or 2 around! I call them fish house heaters as most of us have them for our ice fishing shacks. Pretty handy when the power goes out too. What part of OK are you in?

531blackbanshee wrote: i get alot of use out of one of the
www.amazon.com/Mr-Heater-Single-Tank-Top...rds=mr+heater+indoor

it is good for heating the "area" you are working in.
it uses the tank off a gas grill(which most folks already have and don't use so much when it's cold)
and is affordable enough until you can spring for climate control.

i have two of them and am glad of it.
leon

Thought I would offer up some help with pics.......rock on.

Yes i have Some propane heaters, but they stink and are load. It does do the trick in a pinch, but the produce a lot of moister. Thanks for the help with the pictures.

The non vented are terrible for humidity. My propane furnace went on the blink for a bit last year and I used a Mr Buddy to keep it above freezing for a few days. Very humid.
Wayne

Bluesmoke69 wrote: Yes i have Some propane heaters, but they stink and are load. It does do the trick in a pinch, but the produce a lot of moister. Thanks for the help with the pictures.

Mock up of swing arm using 1998 swing arm spacer and KZ swing arm bolt. The swing arm fit in without dust caps on will have to grind down inside mount about 1/16 on each side. Will also have to cut off mount for the foot peg.

a lil closer!!! :evil:

leon

Nice. Is that a Kawasaki Avenger or Samurai parked in there?