KZR's Bikes of the Month for 2024

my z650 / 1170 rebuild

More
18 Sep 2010 00:48 - 19 Sep 2010 16:26 #399533 by kenty
my z650 / 1170 rebuild was created by kenty
i suppose id better start somewhere , this could be a long story, i got the bike about 10 yrs ago ,it was a californian import with slash cut dragpipes, high bars and a matt black paintjob and it was in boxes dissasembled
i originally intended to rebuild it standard so took the frame into work and blasted and powdercoated it a nice gloss black , i stripped the motor clean and gave it a nice coat of silver, pollished the casings and put it in the frame , i had been told the engine was a good runner but after all the work of cleaning it up it turned out to be goosed .
not having a supply of engines but being a paint sprayer i did a favour for a mate and sprayed his zxr750 and acquired into the deal a gsxr750 motor , this was for something else originally but it seemed so simple to fit i decieded to put it in the 650 .
the suzi motor fell into the frame and the welded on engine mount even lined up so it was simply a matter of remaking the other mounts to suit .
up and running it was clear the suspension and brakes were never going to cope with that motor so i acquired some bits from a suzi 400 bandit , namely the wheels forks and brakes and set about grafting them on , a swingarm from a cbr400 super four also appeared and with a little bit of machining slid into the frame quite nicely .
id better take a breather :laugh:
i decieded id respray it ,including the frame in 3 shades of candy faded into each other , because this was never going to be standard i went the whole 9 yards and it ended up like this , turned a few heads at the local bike meet .
Attachments:
Last edit: 19 Sep 2010 16:26 by kenty.

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 00:58 #399534 by kenty
Replied by kenty on topic my z650 rebuild
sacrilage i know with the suzy motor , but that eventually gave up the ghost and smashed a couple of valve seats and the bike sat unloved in the garden and eventually gave up its parts for another project , ill dig a picture out of it sitting stripped and unloved ,
after three years i decieded it was time to do something with it , the thought of putting a standard engine back in never crossed my mind tho , i wanted something bigger and faster but , i wanted something kawasaki too .
z900 , z1000 would have fitted the bill but as you know these fetch big money nowadays but all was not lost because a gpz1100 came up on a website in bits , ideal for my project i thought , this is what i got .
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 01:08 #399536 by kenty
Replied by kenty on topic my z650 rebuild
now most people would have rebuilt the gpz but the frame was bent and the motor had been standing for many years so it became a donor , it was also very cheap , which i liked .
now a gpz engine conversion is not a simple drop it in and go affair as id hoped but anything can be made to fit with some inginuity and a welder , a large hammer and lots of time ;)
here it is fitted , just to keep you interested in the build .
ill show you later just how much work it took
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 01:37 #399537 by T_Dub
Replied by T_Dub on topic my z650 rebuild
Now that is a cool bike. Looking forward to the details!

1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:06 #399590 by kenty
Replied by kenty on topic my z650 rebuild
here goes a bit of info and some pics
first off i had to remove some of the frame modifications i had done when i put the other motor in, no way would the gpz motor fit . i took a rough guess and chopped it out , as it turned out it wasnt quite enough but better to remove a bit more than have to put some back in .
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:08 #399591 by kenty
Replied by kenty on topic my z650 rebuild
that let the motor in the frame but the front mount needed removing next to let the motor sit a bit further forward
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:09 #399592 by kenty
Replied by kenty on topic my z650 rebuild
the shortened mount welded in place
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:11 #399594 by kenty
Replied by kenty on topic my z650 rebuild
with a bit more shaping and some steel welded back in the frame looked good again
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:15 #399596 by kenty
Replied by kenty on topic my z650 rebuild
now the motor dropped in quite nicely
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:17 #399597 by kenty
Replied by kenty on topic my z650 rebuild
clearance was very tight at the sides tho
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:19 #399598 by kenty
Replied by kenty on topic my z650 rebuild
less than id hoped for
Attachments:

Please Log in or Create an account to join the conversation.

More
18 Sep 2010 09:22 #399600 by kenty
Replied by kenty on topic my z650 rebuild
i also found this triangle bit of webbing under the right side hit the frame rail and stopped the motor dropping any further , simple solution was to remove it !!
Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.