KZR's Bikes of the Month for 2024

new michigan member

More
30 Nov 2019 19:16 - 01 Dec 2019 08:00 #814781 by Shankkole
new michigan member was created by Shankkole
Hello all, I am new to kaws, and lots of good info here . Got a 1974 z900 with a 1000 top end and unknown internals.Also its a trike with a servi-car rear(51),and a girder front.I am sure I will ask and learn a lot here.

Attachment not found

Attachments:
Last edit: 01 Dec 2019 08:00 by Shankkole.

Please Log in or Create an account to join the conversation.

More
01 Dec 2019 10:43 - 01 Dec 2019 10:54 #814806 by Mikaw
Replied by Mikaw on topic new michigan member
Welcome fellow Michigander. Unusual KZ but looks well built. I bet it draws a lot of attention.

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Last edit: 01 Dec 2019 10:54 by Mikaw.
The following user(s) said Thank You: Shankkole

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • Away
  • Platinum Member
More
01 Dec 2019 10:58 #814808 by TexasKZ
Replied by TexasKZ on topic new michigan member
Welcome aboard!

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
The following user(s) said Thank You: Shankkole

Please Log in or Create an account to join the conversation.

  • 9er rider
  • Offline
  • Sustaining Member
  • Keep a cool tool
More
01 Dec 2019 14:15 - 01 Dec 2019 14:16 #814812 by 9er rider
Replied by 9er rider on topic new michigan member
Dual rear brakes and an articulating blade out front? Great looking ride man!

76 kz 900 1075 76 kz 900 a4 78 kz 1000 ltd
Last edit: 01 Dec 2019 14:16 by 9er rider.
The following user(s) said Thank You: Shankkole

Please Log in or Create an account to join the conversation.

More
01 Dec 2019 14:54 #814813 by Trytobuildkzcafe
Replied by Trytobuildkzcafe on topic new michigan member
Nice ride! Welcome I’m new myself and have had quite a few ?’s answered here.
The following user(s) said Thank You: Shankkole

Please Log in or Create an account to join the conversation.

More
01 Dec 2019 19:45 #814824 by Shankkole
Replied by Shankkole on topic new michigan member
Thanks everyone! Well the good is I love this thing, the bad is
1 I ripped the whole rats nest of a wiring harness out ( coils shot explains the leap frog response on road)
2 the paint was barely on there from drying over time
3 resulting in I'm knee deep in an engine pull and top end inspect and rebuild ( will compression test before tearing apart but its sat which is usually BAD !
I bet Im rushing a new fiberglass rear for it by march, painting it before spring. I have found so much on this site from searches already! I am a chopper guy now and a hot rodder in my teens. got a 95 roadking, 79 shovel rigid long bike,and now this fun thing!

Please Log in or Create an account to join the conversation.

More
02 Dec 2019 21:35 - 02 Dec 2019 21:37 #814865 by Shankkole
Replied by Shankkole on topic new michigan member
After a good power wash, ( still some paint left, this is mid process)the cases are old gray. The top end is clean. Im doing a full tear down and don't know if I'm going to polish the cases or do a chrome powder coat.Jugs up will be clean cast, then polished covers. I got a baldor and I use it ! I really bought this thing for a winter project, and now I am constantly thinking about whats getting done tonight!

Attachment not found

Attachments:
Last edit: 02 Dec 2019 21:37 by Shankkole.

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • Away
  • Platinum Member
More
03 Dec 2019 05:18 - 03 Dec 2019 08:18 #814869 by TexasKZ
Replied by TexasKZ on topic new michigan member
Welcome aboard! I see APE cam end plugs. They make some really fun stuff for these old engines, I wonder if there is more inside?

kzzone.com/

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
Last edit: 03 Dec 2019 08:18 by TexasKZ.

Please Log in or Create an account to join the conversation.

  • bluej58
  • Offline
  • Sustaining Member
  • The chrome don't get you home
More
05 Dec 2019 03:30 #814934 by bluej58
Replied by bluej58 on topic new michigan member
Back in the day I knew guys that painted the motors so they didn't have to clean them and usually it was done with the motor still in the bike.
After all these years it turns out that the paint was a good protector of the actual finish and comes off easy.
If your going to repaint you could use a media blaster to ruff it up but if you are going to keep it bare aluminum I would stay away from anything that moves or changes the original finish, aircraft paint remover works well for this.

78 KZ1000 A2A

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
05 Dec 2019 08:58 #814947 by DoctoRot

Please Log in or Create an account to join the conversation.

More
05 Dec 2019 15:50 #814960 by mopguy
Replied by mopguy on topic new michigan member
Welcome from T.O. Canada.

I have a 1980 Kawasaki KZ750 Ltd. I bought new. I recently managed to get it out of my garage after 28 years and put it on the road again (2010). I feel like a kid all over again. Since I have acquired 3 78 KZ1000 Ltd, 1 1981 KZ1000 Ltd, and another 1980 KZ750 Ltd. Love the LTD's.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.