TOPIC:

Just some pictures from the restoration of my KZ1000A2

.

think it went into the wrong forum.

Moved it to "Projects"
Welcome back Lars.

KZCSI

Welcome. Cool stuff. How cool is a dual cabled, dual drum brake.
You are from over the pond?
I have just sold some KZ parts to Austria and New Zealand
That cyle looks like it should be on an episode of "cafe racer"
I dig your own exhaust! Is that stainless or titanium? I can't make out the writing on the material.
Do you guys have the cable TV motorcycle shows?
Is your shop on one of them?

Nice work, I enjoy modified and hand built stuff myself.

Thanks for sharing.

Marty in the USA in New York State

Does the front brake use two cables?

What is the item in the second pic (birds eye view}? I cannot see it clearly enough to identify. Oil cooler? Thanks
Wayne

Yep from the right side of the pond Denmark!!!
Thank you.... how do i move it??

The exhaust is stainless and gonna be 2x 2in1 - love the unbalance sound when you split them!!!

Front fork is from a Suzuki GT 750 4ls, thats why there is 2 cables- one for each side!!

Yep its the oil cooler i've mounted in front/side of the engine - trying to but as much as low as possible to get the best handling of the bike!!!

Did'nt have the time for the caferacer tv, and actually havn't seen it yet...

How do i convert the chain down to 520/525 - think it need to run 18/38-40 or whats your opinion???
Have 1197cc Wiseco etc!!!

Have done some new stuff the last few evenings
-Finally got the right size cooler and got it mounted
-Fitted a rearfender
-and made some more frame work- might not be necessary, but didnt like the square
-Also had the seatpan made+ some frame mount for my travellers bag

love all the fab work sir.
you have tied the sub frame together very well.that should help alot.

you are going to need some conversion sprockets.

do you need to have any offset in the countershaft sprocket?

leon

p.s.
z1kzonly he is from a well known shop in denmark known for building brutally beautiful bikes.
while the site rules about advertising may prevent "him" from telling you the shop name he works for.
it is okay for "me" to tell you he works at wrenchmonkees.

Cant argue you that,,,

Anyone who can remember the measures between the wholes on the green Dyna Coils???

finished up the staonless Exhaust last week- ended up quit short so looking forward to the sound






Also welded one more side stand on the bike so it will be easier to park in the sand when going to the beach...

Nice work.....are installing a cross over on the exhaust?
Normally you would since 1&2 are into one and 3&4 are into one.
Other system I've seen are were 1&3 are into one and 2&4 are into one.