- Posts: 290
- Thank you received: 5
What do you do (for work) when you're not riding?
- IowaKZ
- Offline
- User
- '80 G1 Classic
Been a while since we did this, and with so many new members maybe we should give it another go...
I'll start it off...
I'm an engineer working in a little aerospace company in Sothern California. I'm the company's Quality Manager and I also work for the FAA, certifying parts for airplanes.
Next?
LTD, who do you work for. I am a Customer Demand Manager for a large Aluminum sheet and plate producer in Davenport Iowa.
1980 G1 Classic
Bettendorf, Iowa
Please Log in or Create an account to join the conversation.
- oldcoldankles
- Offline
- User
Post edited by: oldcoldankles, at: 2007/11/08 21:21
Post edited by: KZCSI, at: 2007/11/08 22:34
Peachland BC
1981 KZ1000 CSR M1
1983 KZ550 LTD M1 (Shaft)
1989 Corvette coupe
Please Log in or Create an account to join the conversation.
- Talman
- Offline
- User
- Posts: 102
- Thank you received: 1
I'm an equiptment operator and mechanic for my local town highway department. I mostly run grader and excavator in the summer months and plow snow and repair eqiuptment and trucks in the winter months here in the rolling hills of upstate New York.
KZLuke,
What do you consider Upstate NY? I always found it interesting that the more south one goes in NY the more south people consider "upstate". Growing up in Rockland County, people in Long Island considered that Upstate. Going to undergrad way up in Clinton County I learned what "Upstate" really is.
1976 KZ 400 (Free, free, free...needs major work)
2004 Intruder Volusia
ex- 1976 KZ 400 Hot rod (Owned by return2ridin before me and Wolfencopter after me. Does anyone have it now
?)
ex- 1978 KZ 200
Bergen County, NJ
Aint no time to hate....barely time to wait
Please Log in or Create an account to join the conversation.
- ronjones
- Offline
- User
- Posts: 565
- Thank you received: 4
'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades
Please Log in or Create an account to join the conversation.
- 650ed
- Offline
- User
- Posts: 15343
- Thank you received: 2829
Well drilling contractor in the Southern Interior of BC Canada
Post edited by: oldcoldankles, at: 2007/11/08 21:21<br><br>Post edited by: KZCSI, at: 2007/11/08 22:34
Coldankles,
It looks like you parked your rig in a shallow lake to drill the well. Isn't that considered cheating? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Sandy
- Offline
- User
- Fly High,Tony
- Posts: 2452
- Thank you received: 13
Yeeeeup...I make My living...on My knees.(keep the comments clean,people.:laugh: )
I'm currently working up at Red Mountain Ski-Resort,doing some flooring in the Slalom Creek condos. (Rossland,British Columbia).
The construction up there will not stop for years to come...it's a bloody ZOO!("GitterDONE!"):lol:
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- oldcoldankles
- Offline
- User
It looks like you parked your rig in a shallow lake to drill the well. Isn't that considered cheating? Ed[/quote]
No Ed, it was a flowing artesian well and while we were getting the water diverted away from the rig it flooded part of his hay field;)
Peachland BC
1981 KZ1000 CSR M1
1983 KZ550 LTD M1 (Shaft)
1989 Corvette coupe
Please Log in or Create an account to join the conversation.
- Mellvis
- Offline
- User
- Posts: 250
- Thank you received: 3
Please Log in or Create an account to join the conversation.
- hardr0ck68
- Offline
- User
- Who put the what in the where?
- Posts: 804
- Thank you received: 3
I am a certified teacher in New York state, and i consider Rochester upstate (everything parallel to or north of Syracuse is upstate!)
After university i did not want to start the 20 year routine many folks complain so much about, so i have been traveling and when i can working in random countries; at one point i boxed Microsoft software in a factory in Ireland...
One day the party will end, I hope by then i can learn how to weld and try to weasel my way into a union... or maybe i will join the Army... or maybe learn to drive a big truck... i dunno
1977 kz650 c1
bought it because I was told it would never run again...I like to prove people wrong.
Please Log in or Create an account to join the conversation.
- KZJerry
- Offline
- User
- Posts: 17
- Thank you received: 0
1 semester away from a degree in Forest Technology, then I'll probably head out west to fight fires for the USFS or some similar unit.
Please Log in or Create an account to join the conversation.
- donthekawguy
- Offline
- User
- Posts: 1913
- Thank you received: 8
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Please Log in or Create an account to join the conversation.
- KZErider
- Offline
- User
- Posts: 353
- Thank you received: 12
81 KZ750E2(project), 81 KZ750E2(parts donor), 87 BMW K 75C - got it runnin, didn't care for it, holding for family member, 79 CB650(project) Nomad 1700, VStar 950
Please Log in or Create an account to join the conversation.