- Posts: 8019
- Thank you received: 1645
Motorcycle cover
- martin_csr
- Topic Author
- Offline
- User
Less
More
27 Oct 2022 14:03 - 27 Oct 2022 14:17 #876077
by martin_csr
Motorcycle cover was created by martin_csr
What size motorcycle cover would fit a 1981 KZ650-CSR w luggage rack?
Without doing much searching, all I'm seeing is S-M-L-XL-XXL & what type of motorcycle they fit, but no actual measurements even at one of the mfg websites. Thanks.
ps: the 650-CSR size-wise is identical to a KZ750H Ltd as they have the same frame & some other stuff.
Without doing much searching, all I'm seeing is S-M-L-XL-XXL & what type of motorcycle they fit, but no actual measurements even at one of the mfg websites. Thanks.
ps: the 650-CSR size-wise is identical to a KZ750H Ltd as they have the same frame & some other stuff.
Last edit: 27 Oct 2022 14:17 by martin_csr.
Please Log in or Create an account to join the conversation.
- Nerdy
- Offline
- Sustaining Member
Less
More
- Posts: 1033
- Thank you received: 399
27 Oct 2022 18:34 #876092
by Nerdy
1979 KZ400 Gifted to a couple of nephews
1967 Yamaha YCS1 Bonanza
1980 KZ440B
1981 Yamaha XT250H
1981 KZ440 LTD project bike
1981 GPz550
2013 Yamaha FZ6R
Replied by Nerdy on topic Motorcycle cover
I searched for "motorcycle cover" on Amazon: a lot of the listings do mention length (86", 96.5", 104", 116", etc.).
Not sure what your 650's dimensions are with the rack, but this cover has a length of 96.5", a width of 41", and a height of 50".
www.amazon.com/Motorcycle-Waterproof-Out...versal/dp/B09R72TR8N
Not sure what your 650's dimensions are with the rack, but this cover has a length of 96.5", a width of 41", and a height of 50".
www.amazon.com/Motorcycle-Waterproof-Out...versal/dp/B09R72TR8N
1967 Yamaha YCS1 Bonanza
1980 KZ440B
1981 Yamaha XT250H
1981 KZ440 LTD project bike
1981 GPz550
2013 Yamaha FZ6R
Please Log in or Create an account to join the conversation.
- Ojisan rider
- Offline
- Sustaining Member
Less
More
- Posts: 327
- Thank you received: 65
27 Oct 2022 20:05 - 28 Oct 2022 07:03 #876096
by Ojisan rider
82' KZ750-R1 cafe racer style. Clip-on, Rear set, Fork-Brace, Mikuni Flat-slide (forgot the size), Kerker.
84' GPz750 (basket case). everything are in pieces.
89' ZX750-H1 (ZX-7 Ninja). Resurrection project are on going with my KZ750. Everything is stock.
Replied by Ojisan rider on topic Motorcycle cover
I use this one from Amazon.
www.amazon.com/gp/product/B0183NQESM/ref...o09_s00?ie=UTF8&th=1
I have two bikes with this cover. On my 89 ZX-7, it has more than enough to cover the whole bike. It's actually little bit too big for my taste, but working fine. It's little big, so I have a nylon rope holding it down on the middle as strong gust will flip the cover. On my 82 KZ/GPz, I don't have mirror install yet but the height is just enough. With the mirrors, I think it will be tad short from the ground. Length is more than enough, though. I can't say anything about width because I don't have mirrors yet.
In the first picture, the one in front is my KZ, and behind it is my ZX. I don't have the nylon rope around my ZX as I recently worked on my bike and will work on it again soon.
Last between three to five years in hot Hawaiian sun before it start falling apart (rip/tears).
www.amazon.com/gp/product/B0183NQESM/ref...o09_s00?ie=UTF8&th=1
I have two bikes with this cover. On my 89 ZX-7, it has more than enough to cover the whole bike. It's actually little bit too big for my taste, but working fine. It's little big, so I have a nylon rope holding it down on the middle as strong gust will flip the cover. On my 82 KZ/GPz, I don't have mirror install yet but the height is just enough. With the mirrors, I think it will be tad short from the ground. Length is more than enough, though. I can't say anything about width because I don't have mirrors yet.
In the first picture, the one in front is my KZ, and behind it is my ZX. I don't have the nylon rope around my ZX as I recently worked on my bike and will work on it again soon.
Last between three to five years in hot Hawaiian sun before it start falling apart (rip/tears).
82' KZ750-R1 cafe racer style. Clip-on, Rear set, Fork-Brace, Mikuni Flat-slide (forgot the size), Kerker.
84' GPz750 (basket case). everything are in pieces.
89' ZX750-H1 (ZX-7 Ninja). Resurrection project are on going with my KZ750. Everything is stock.
Last edit: 28 Oct 2022 07:03 by Street Fighter LTD.
The following user(s) said Thank You: ThatGPzGuy
Please Log in or Create an account to join the conversation.
- martin_csr
- Topic Author
- Offline
- User
Less
More
- Posts: 8019
- Thank you received: 1645
28 Oct 2022 06:16 - 28 Oct 2022 07:19 #876101
by martin_csr
Replied by martin_csr on topic Motorcycle cover
Thanks for the replies. I only searched CycleGear & one of the brands there. was kinda lazy. and even forgot to measure the motorcycle. hee.
ps: I'm planning on getting one to protect the motorcycle from dog hair & dog drool in the garage, but may end up going w a good one so I can leave the motorcycle outside occasionally. It's currently protected by a cheap HF moving blanket & towels but it's getting old doing that & the coverage isn't the best. doh.
ps: I'm planning on getting one to protect the motorcycle from dog hair & dog drool in the garage, but may end up going w a good one so I can leave the motorcycle outside occasionally. It's currently protected by a cheap HF moving blanket & towels but it's getting old doing that & the coverage isn't the best. doh.
Last edit: 28 Oct 2022 07:19 by martin_csr.
Please Log in or Create an account to join the conversation.
- Wookie58
- Online
- Moderator
Less
More
- Posts: 4168
- Thank you received: 2386
28 Oct 2022 08:26 #876108
by Wookie58
Replied by Wookie58 on topic Motorcycle cover
Thanks for the replies. I only searched CycleGear & one of the brands there. was kinda lazy. and even forgot to measure the motorcycle. hee.
ps: I'm planning on getting one to protect the motorcycle from dog hair & dog drool in the garage, but may end up going w a good one so I can leave the motorcycle outside occasionally. It's currently protected by a cheap HF moving blanket & towels but it's getting old doing that & the coverage isn't the best. doh.
The following user(s) said Thank You: martin_csr
Please Log in or Create an account to join the conversation.
- Injected
- Offline
- User
Less
More
- Posts: 1069
- Thank you received: 578
28 Oct 2022 09:48 - 28 Oct 2022 10:02 #876113
by Injected
Replied by Injected on topic Motorcycle cover
I ride to my Swap Meet every year I can. KZ650 with rear rack. The rear rack does not go beyond the rear fender so it does not add to the length.
I bought one from my local dealer :
gearscanada.com/products/premium-motorcy...riant=16332993036399
I believe mine is a Medium. It says its 95" long, the 650 is only about 88-90" long depending on the model.
I don't have any good pictures with it covered... You can see a portion of it here on the far right side :
Even with the fairing and the hard bags the original cover still fits good. It covers all the way down to the grass then I can tighten it down with the straps under the exhaust.
I bought one from my local dealer :
gearscanada.com/products/premium-motorcy...riant=16332993036399
I believe mine is a Medium. It says its 95" long, the 650 is only about 88-90" long depending on the model.
I don't have any good pictures with it covered... You can see a portion of it here on the far right side :
Even with the fairing and the hard bags the original cover still fits good. It covers all the way down to the grass then I can tighten it down with the straps under the exhaust.
Last edit: 28 Oct 2022 10:02 by Injected.
Please Log in or Create an account to join the conversation.