- Posts: 4
- Thank you received: 1
Clutch lever and saddle lock, and others
- makkio
- Topic Author
- Offline
- User
Less
More
28 Oct 2024 00:43 #905533
by makkio
Clutch lever and saddle lock, and others was created by makkio
Hello
i'm restoring a '76 z900-a4.
I have to replace clutch lever and support because the installed one isn't original.
can anyone make a photo of the original components and/or tell me which models used same components so i can find it on the internet?
I also need the saddle keylock and the chain guard. is it possibile to found it in eu?
Thank you in advance.
i'm restoring a '76 z900-a4.
I have to replace clutch lever and support because the installed one isn't original.
can anyone make a photo of the original components and/or tell me which models used same components so i can find it on the internet?
I also need the saddle keylock and the chain guard. is it possibile to found it in eu?
Thank you in advance.
Please Log in or Create an account to join the conversation.
- H1Vindicator
- Offline
- User
Less
More
- Posts: 645
- Thank you received: 61
28 Oct 2024 04:54 #905535
by H1Vindicator
Replied by H1Vindicator on topic Clutch lever and saddle lock, and others
Kawasaki and partzilla have diagrams. partzilla doesn't have cross-reference info for the perch. several are listed on ebbayy. the 73 Z1 and 1000A have different part numbers. I didn't check any other models or the lever. KAWASAKI OEM HOLDER,CLUTCH LEVER | 46094-017.
The following user(s) said Thank You: asphalt900, makkio
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4167
- Thank you received: 2386
28 Oct 2024 05:28 #905536
by Wookie58
Replied by Wookie58 on topic Clutch lever and saddle lock, and others
The following user(s) said Thank You: asphalt900
Please Log in or Create an account to join the conversation.
- asphalt900
- Offline
- User
Less
More
- Posts: 701
- Thank you received: 291
29 Oct 2024 03:50 #905546
by asphalt900
Replied by asphalt900 on topic Clutch lever and saddle lock, and others
The KZ900A and B used similar to the picture Wookie provided but they didn't start using the clutch lock-out switch with lead shown till 1978. Also the BIG thumbwheel cable adjuster wasn't used till 1978 also. The barrel where cable "metal" end inserts used a "2" line adjuster, not the singular line one on the Z1. They also used this "non-switch hole" perch on the KZ400 of the same year and several other models too. I only mention KZ400 because they usually sell cheaper because 400's don't bring much money and person's selling "usually" don't realize the interchange capabilities. Seat locks for the KZ900 were kinda special. They used a two-piece "hook", one fatter, one thinner plate riding together on the pin. Both single and two-piece interchange though. And merely finding a lock...I'd imagine You would want all the three pieces to match using the same key??
The following user(s) said Thank You: makkio
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4167
- Thank you received: 2386
29 Oct 2024 04:53 #905548
by Wookie58
Replied by Wookie58 on topic Clutch lever and saddle lock, and others
Thanks Clay - this is a "supersession" part number so being compatible to 78 etc makes senseThe KZ900A and B used similar to the picture Wookie provided but they didn't start using the clutch lock-out switch with lead shown till 1978. Also the BIG thumbwheel cable adjuster wasn't used till 1978 also. The barrel where cable "metal" end inserts used a "2" line adjuster, not the singular line one on the Z1. They also used this "non-switch hole" perch on the KZ400 of the same year and several other models too. I only mention KZ400 because they usually sell cheaper because 400's don't bring much money and person's selling "usually" don't realize the interchange capabilities. Seat locks for the KZ900 were kinda special. They used a two-piece "hook", one fatter, one thinner plate riding together on the pin. Both single and two-piece interchange though. And merely finding a lock...I'd imagine You would want all the three pieces to match using the same key??
Please Log in or Create an account to join the conversation.
- Scirocco
- Offline
- Premium Member
- Never change a running system
Less
More
- Posts: 4199
- Thank you received: 2076
29 Oct 2024 15:35 #905568
by Scirocco
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Replied by Scirocco on topic Clutch lever and saddle lock, and others
WWW.Z-FEVER.DE
z-fever.de/shop/en/?cat=c597_SEAT---CHAI...T---CHAIN-COVER.html
z-fever.de/shop/en/?cat=c621_HANDLEBAR-HANDLEBAR.html
BTW, i my self use, or would take the Z1000A1 clutch leveler and holder, both are much more beefier at the bolt area!!!
z-fever.de/shop/en/product_info.php?info...utch-lever-assy.html
z-fever.de/shop/en/?cat=c597_SEAT---CHAI...T---CHAIN-COVER.html
z-fever.de/shop/en/?cat=c621_HANDLEBAR-HANDLEBAR.html
BTW, i my self use, or would take the Z1000A1 clutch leveler and holder, both are much more beefier at the bolt area!!!
z-fever.de/shop/en/product_info.php?info...utch-lever-assy.html
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
The following user(s) said Thank You: asphalt900, SWest, makkio
Please Log in or Create an account to join the conversation.
- asphalt900
- Offline
- User
Less
More
- Posts: 701
- Thank you received: 291
30 Oct 2024 00:58 #905588
by asphalt900
Replied by asphalt900 on topic Clutch lever and saddle lock, and others
Makkio, Part number You seek is 46094-017 (Perch NO Hole) and 46092-022or023 (Lever). These items are abundantly available. Ones everyone are showing have the hole for the switch, totally unnecessary. Your stock wiring harness won't support it, nowhere to plug it into unless You tap into the wiring to solenoid. Anyway a couple pics of the History of Z1/KZ and later J perches. Pics from left Early to right Newer.
Everybody is Also correct in "Function", the other ones will definitely work but You said (Restore). That brings about a whole different meaning, to me at least, for correctness.
The following user(s) said Thank You: sf4t7, SWest, Scirocco, Wookie58, makkio
Please Log in or Create an account to join the conversation.
- makkio
- Topic Author
- Offline
- User
Less
More
- Posts: 4
- Thank you received: 1
30 Oct 2024 08:25 #905592
by makkio
Replied by makkio on topic Clutch lever and saddle lock, and others
Thank you everyone very much!
The following user(s) said Thank You: asphalt900
Please Log in or Create an account to join the conversation.
- asphalt900
- Offline
- User
Less
More
- Posts: 701
- Thank you received: 291
30 Oct 2024 08:35 #905594
by asphalt900
Replied by asphalt900 on topic Clutch lever and saddle lock, and others
Need a picture difference between to the forementioned seat locks? i have a whole box of them, just have to dig them out though.
Please Log in or Create an account to join the conversation.