- Posts: 6647
- Thank you received: 325
Fabricating Kawasaki brackets
- Mcdroid
- Topic Author
- Away
- User
- Gone Kwackers
Less
More
07 Sep 2024 13:43 - 07 Sep 2024 13:43 #904074
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Fabricating Kawasaki brackets was created by Mcdroid
So, we know that Kawasaki has some complicated brackets to do a variety of functions on many different models of motorcycles. As our motorcycles age, replacement brackets are increasingly difficult to source and some members have had to fabricate replacment brackets. I, however, have not the technical skills or the equipment to do any bracket fabrications. Specifically, I'm looking to fabricate the upper and lower mounting brackets for the fairing for the 1981 KZ1100-b1 (AKA 1981 GPz1100). Note that this fairing did not come installed on the motorcycle but had to be purchased as an accessory from a Kawasaki dealer. Luckily I have a set of the mounting brackets so potentially a machinist could copy them. My question is, can anyone suggest an individual or business that might be able to fabricate these mounts?
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Last edit: 07 Sep 2024 13:43 by Mcdroid. Reason: spelling
Please Log in or Create an account to join the conversation.
- KZQ
- Offline
- Administrator
- Walking Behind the Corn May Not Be All That!
Less
More
- Posts: 4836
- Thank you received: 1416
09 Sep 2024 05:58 #904120
by KZQ
www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Valkyrie, 2009 Yamaha Roadliner S. 1983 GL 1100
Projects:
1985 ZN1300
Replied by KZQ on topic Fabricating Kawasaki brackets
This message contains secure information
www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Valkyrie, 2009 Yamaha Roadliner S. 1983 GL 1100
Projects:
1985 ZN1300
Please Log in or Create an account to join the conversation.
- Mcdroid
- Topic Author
- Away
- User
- Gone Kwackers
Less
More
- Posts: 6647
- Thank you received: 325
09 Sep 2024 06:57 #904124
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Replied by Mcdroid on topic Fabricating Kawasaki brackets
Greetings Bill:
Not sure why ATT would block KZRider but I seem to recall that this problem has cropped up before in our communications. I have an easier solution...change my email to mjmccoid@gmail.com. I think I am going to migrate my communications to that venue...I'm not a big ATT fan anyway.
Not sure why ATT would block KZRider but I seem to recall that this problem has cropped up before in our communications. I have an easier solution...change my email to mjmccoid@gmail.com. I think I am going to migrate my communications to that venue...I'm not a big ATT fan anyway.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
The following user(s) said Thank You: KZQ
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4214
- Thank you received: 2412
09 Sep 2024 07:12 #904126
by Wookie58
Replied by Wookie58 on topic Fabricating Kawasaki brackets
Profile updatedGreetings Bill:
Not sure why ATT would block KZRider but I seem to recall that this problem has cropped up before in our communications. I have an easier solution...change my email to mjmccoid@gmail.com. I think I am going to migrate my communications to that venue...I'm not a big ATT fan anyway.
The following user(s) said Thank You: KZQ
Please Log in or Create an account to join the conversation.
- howardhb
- Offline
- Sustaining Member
- God, I trust
Less
More
- Posts: 456
- Thank you received: 476
10 Sep 2024 02:21 #904165
by howardhb
'81 GPz 550 D1
'81 GPz 1100 B1 ELR "Tribute" www.kzrider.com/our-forum/11-projects/61...-elr-tribute?start=0
'82 Yamaha YB100 Fizzie
'79 Suzuki GT200 X5 TWO STROKE TWIN - SMOKER!
Replied by howardhb on topic Fabricating Kawasaki brackets
Hi McDroid.
I have done exactly that! I fit a B2 bikini fairing to a 1981 GPZ 1100 B1 (KZT10B)
Below is what I fabricated:
I have a spare set as above...
I have done exactly that! I fit a B2 bikini fairing to a 1981 GPZ 1100 B1 (KZT10B)
Below is what I fabricated:
I have a spare set as above...
'81 GPz 550 D1
'81 GPz 1100 B1 ELR "Tribute" www.kzrider.com/our-forum/11-projects/61...-elr-tribute?start=0
'82 Yamaha YB100 Fizzie
'79 Suzuki GT200 X5 TWO STROKE TWIN - SMOKER!
The following user(s) said Thank You: Mcdroid
Please Log in or Create an account to join the conversation.
- Mcdroid
- Topic Author
- Away
- User
- Gone Kwackers
Less
More
- Posts: 6647
- Thank you received: 325
10 Sep 2024 03:49 - 10 Sep 2024 03:50 #904169
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Replied by Mcdroid on topic Fabricating Kawasaki brackets
You have far more skills than I do. What I'm looking for actually, is someone to replicate the KZ1100-B1 (aka 1981) mounting hardware. I will attempt to post a photo later.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Last edit: 10 Sep 2024 03:50 by Mcdroid. Reason: spelling
The following user(s) said Thank You: howardhb
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4214
- Thank you received: 2412
10 Sep 2024 04:18 #904171
by Wookie58
Replied by Wookie58 on topic Fabricating Kawasaki brackets
As it is an "accessory" part number you posted, does the "Partzilla" part number for a complete fairing come with the hardware ?You have far more skills than I do. What I'm looking for actually, is someone to replicate the KZ1100-B1 (aka 1981) mounting hardware. I will attempt to post a photo later.
Please Log in or Create an account to join the conversation.
- Mcdroid
- Topic Author
- Away
- User
- Gone Kwackers
Less
More
- Posts: 6647
- Thank you received: 325
10 Sep 2024 07:56 #904181
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Replied by Mcdroid on topic Fabricating Kawasaki brackets
Wookie:
So, I asked Partzilla that very question and they responded that they 'suspected' that it was the fairing only (with no hardware or possibly also no windscreen). Their reasoning being that Kawasaki sells single parts, not entire part sets. I suspect that they don't know what K46000-153A actually consists of...and I am currently unwilling to take a US$173 gamble. But it is enlightening to know that 40 year-old accessory parts are still available.
So, I asked Partzilla that very question and they responded that they 'suspected' that it was the fairing only (with no hardware or possibly also no windscreen). Their reasoning being that Kawasaki sells single parts, not entire part sets. I suspect that they don't know what K46000-153A actually consists of...and I am currently unwilling to take a US$173 gamble. But it is enlightening to know that 40 year-old accessory parts are still available.
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4214
- Thank you received: 2412
10 Sep 2024 08:33 #904183
by Wookie58
Replied by Wookie58 on topic Fabricating Kawasaki brackets
FFS *@ - customer service at it's best (I guess it would be too much trouble for someone to actually "look in the box") from the brochure you posted it list's a single part number for "the accessory" not individual components. (I agree it's too much of a gamble to order on the off chance that it's all there)Wookie:
So, I asked Partzilla that very question and they responded that they 'suspected' that it was the fairing only (with no hardware or possibly also no windscreen). Their reasoning being that Kawasaki sells single parts, not entire part sets. I suspect that they don't know what K46000-153A actually consists of...and I am currently unwilling to take a US$173 gamble. But it is enlightening to know that 40 year-old accessory parts are still available.
Please Log in or Create an account to join the conversation.