- Posts: 913
- Thank you received: 3
Leftover part--please help me find where this goes!
- Skyman
- Topic Author
- Offline
- User
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
Thanks.
West Linn, OR
Please Log in or Create an account to join the conversation.
- BSKZ650
- Offline
- User
- Posts: 2064
- Thank you received: 14
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- lifeliberty
- Offline
- User
- Posts: 68
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- hwms
- Offline
- User
- Posts: 263
- Thank you received: 1
Harry
Please Log in or Create an account to join the conversation.
- Skyman
- Topic Author
- Offline
- User
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
- Posts: 913
- Thank you received: 3
is it one of the clamps that your clutch cable goes through? I think it is mounted on your frame downtube in front of your gas tank.
Yes, it should be for the clutch cable, as I had removed the cable so I could clean the front sprocket cover. I was trying to find where it connected under the cover. When I get home tonight, I will see if I can find where it attaches higher up on the bike.
It is weird, though. I don't remember having removed it. Maybe it came loose long ago and slid down the cable.
Thanks all for your help.
West Linn, OR
Please Log in or Create an account to join the conversation.
- Skyman
- Topic Author
- Offline
- User
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
- Posts: 913
- Thank you received: 3
is it one of the clamps that your clutch cable goes through? I think it is mounted on your frame downtube in front of your gas tank.
Well, I went home and took another look at the bike. I found another clamp that I think you were referring to that attaches to the downtube. That one is still in place.
No, the orphaned clamp I have is different. It has a tab with a hole so it can be bolted onto something. I just can't figure out which bolt holds it in place.
Any other ideas? Thanks.
Post edited by: Skyman, at: 2006/06/15 11:38
West Linn, OR
Please Log in or Create an account to join the conversation.
- fixer5000
- Offline
- User
- Posts: 415
- Thank you received: 5
1978 kz650b pretty much stock
\\\\\\\" get there fast but arrive alive \\\\\\\"
massachusetts
Please Log in or Create an account to join the conversation.
- fixer5000
- Offline
- User
- Posts: 415
- Thank you received: 5
1978 kz650b pretty much stock
\\\\\\\" get there fast but arrive alive \\\\\\\"
massachusetts
Please Log in or Create an account to join the conversation.
- patmann
- Offline
- User
- Posts: 396
- Thank you received: 6
1974 900 Z1 modified to look like a LTD , some engine mods. But I still have all the original parts.
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
Please Log in or Create an account to join the conversation.
- Skyman
- Topic Author
- Offline
- User
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
- Posts: 913
- Thank you received: 3
after looking a little closer i think it goes on the top left tube clamp to hold the cable in close to the forks...steve
Okay, I'll take another look at that when I get home tonight. If that is where it goes, I was looking in the wrong area. I assumed that since I found it after having reomved the front sprocket cover, that it was supposed to be attached somewhere at the bottom. It must have come lose and slipped down long ago, and I never noticed it.
Thanks again.
West Linn, OR
Please Log in or Create an account to join the conversation.