Fork spacing...KZ1000P vs. 1000J

More
28 Apr 2006 06:03 #43381 by 415ZR1
Fork spacing...KZ1000P vs. 1000J was created by 415ZR1
Did a forum search, don't have a J to measure...but read somewhere that the late KZ1000P have wider fork spacing compared to the J. Anyone know? Anyone with a J wish to measure fork tube center spacing?

Thanks, John

Please Log in or Create an account to join the conversation.

More
28 Apr 2006 06:25 #43386 by btchalice
Replied by btchalice on topic Fork spacing...KZ1000P vs. 1000J
dont know if a spectre 1100 is a "j" but its 7.5" same as my 900 just bigger diameter

Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.

Please Log in or Create an account to join the conversation.

More
04 May 2006 11:18 #45068 by RV
Replied by RV on topic Fork spacing...KZ1000P vs. 1000J
Hey John! the later P's(after `82?) are wider; tried to install front wheel assy on `81 Gpz1100, no go.
I measured to see what was wrong; the whole front assy was wider, don't remember yr of P I got the frontend from.
Can't give you fork-spacing #'s rt now, it's somewhere in the garage rafters.
J's & early Gpz's use the same 19" wheel, would think the spacing would be same.
Hope this helps. RV

Please Log in or Create an account to join the conversation.

More
04 May 2006 16:15 #45134 by pidaster
Replied by pidaster on topic Fork spacing...KZ1000P vs. 1000J
I've been told that mine has a wider fork. I know the diameter is 38mm but the distance between I'm not sure of.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum