Steering stem interchangability?!?!

  • twowheeledterror
  • Topic Author
  • Visitor
27 Feb 2006 18:43 #26909 by twowheeledterror
Steering stem interchangability?!?! was created by twowheeledterror
Okay, need to find this out.

What other KZ's had identical stems to a 79 KZ650? Some of the 750's perhaps?

I need to track down a lower triple to press the stem out of so I can press it into the from forks I've got and mount it all to the frame.

Thanks!

Please Log in or Create an account to join the conversation.

More
28 Feb 2006 07:35 #27056 by OnkelB
Replied by OnkelB on topic Steering stem interchangability?!?!
I uploaded a Kawasaki steering stem bearings list a while back, here are a couple of links to it:

List as Word document:

kzrider.com/component/option,com_docman/...ad/gid,241/Itemid,5/

List as PDF:

kzrider.com/component/option,com_docman/...ad/gid,242/Itemid,5/

Note that the list will only show which bikes share the same stem diameter, the length of the stems may vary.

77 KZ 650 B1, 82 GPz 1100 B2.

Please Log in or Create an account to join the conversation.

More
28 Feb 2006 07:56 #27059 by steell
Replied by steell on topic Steering stem interchangability?!?!
I have both a 650 and a 750B steering stem with lower clamp, I'm on my way out the door right now but I'll try to get time to measure the length later. It would be easier for me if you would measure the length of the neck on the 650 though, it's easier for me to measure the neck on a 750B frame than to dig out the steering stems :D

KD9JUR

Please Log in or Create an account to join the conversation.

  • twowheeledterror
  • Topic Author
  • Visitor
28 Feb 2006 23:11 #27247 by twowheeledterror
Replied by twowheeledterror on topic Steering stem interchangability?!?!
The neck on the 650 is 7.5" long. :)

Let me know what works.

Please Log in or Create an account to join the conversation.

  • ran429
  • Offline
  • User
  • Master of FREE rides!
More
01 Mar 2006 20:49 #27455 by ran429
Replied by ran429 on topic Steering stem interchangability?!?!
twowheeledterror wrote:

The neck on the 650 is 7.5" long. :)

Let me know what works.




1981 kz750E is the same
And diameter of the shaft is aprox 1-1/8 wide.

I measured my parts bike steering head from lip to lip with the tripples out/ no bearings

Post edited by: ran429, at: 2006/03/01 23:50

Please Log in or Create an account to join the conversation.

  • twowheeledterror
  • Topic Author
  • Visitor
01 Mar 2006 21:47 #27465 by twowheeledterror
Replied by twowheeledterror on topic Steering stem interchangability?!?!
Thanks man!

So it sounds like any 650 and any 750 should work out. :)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum