- Posts: 2
- Thank you received: 0
1981 KZ 650 speedo
- camzaro28
- Topic Author
- Offline
- User
Less
More
03 Jul 2006 21:45 #59132
by camzaro28
1981 KZ 650 speedo was created by camzaro28
not sure if this is the right forum, what less could you expect from a newbie. but here goes.
i am looking for a speedometer for a family member. he looked on ebay and went to kawasaki dealership. ebay did not have anything and the dealership wanted 500+ for it.
bike is a 1981 kawasaki KZ 650/H csr1
if i dont find it here, could someone recommend a place to look?
all suggestions welcome.
thanks in advance
i am looking for a speedometer for a family member. he looked on ebay and went to kawasaki dealership. ebay did not have anything and the dealership wanted 500+ for it.
bike is a 1981 kawasaki KZ 650/H csr1
if i dont find it here, could someone recommend a place to look?
all suggestions welcome.
thanks in advance
Please Log in or Create an account to join the conversation.
- JR
- Offline
- Sustaining Member
Less
More
- Posts: 2933
- Thank you received: 446
04 Jul 2006 09:24 #59237
by JR
1980 kz750E1, Delkevic exhaust
Replied by JR on topic 1981 KZ 650 speedo
I've seen speedos on the Old Bike Barn website
www.oldbikebarn.com/index.php
. I have never dealt with them so dont know how they are. I'm sure there must be a bunc of places that sell them. Hang around and someome will be along with a better suggestion than mine.
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- RetroRiceRocketRider
- Offline
- User
- ...bring in the machine that goes PING!
Less
More
- Posts: 1641
- Thank you received: 29
04 Jul 2006 10:00 #59250
by RetroRiceRocketRider
Replied by RetroRiceRocketRider on topic 1981 KZ 650 speedo
Tough break there, since the cross-reference software shows that speedo (part# 25005-1094) fitting only the '81 KZ650 CSR.
You didn't say, is the speedo in question here just not functioning, or is it missing?
If not functioning, there are places that can restore and calibrate them to spec.
Check with Bob at Z-Resto (76kz900@bellsouth.net), he's in Atlanta, GA. Prices vary depending on the year and condition of the bike the gauge is from, but average restoration runs about US$85.
I'm not 100% sure that he can restore one for an '81 KZ since he usually only restores gauges from '72~'80, but it couldn't hurt to drop him a line and ask.
Post edited by: RetroRiceRocketRider, at: 2006/07/04 13:02
You didn't say, is the speedo in question here just not functioning, or is it missing?
If not functioning, there are places that can restore and calibrate them to spec.
Check with Bob at Z-Resto (76kz900@bellsouth.net), he's in Atlanta, GA. Prices vary depending on the year and condition of the bike the gauge is from, but average restoration runs about US$85.
I'm not 100% sure that he can restore one for an '81 KZ since he usually only restores gauges from '72~'80, but it couldn't hurt to drop him a line and ask.
Post edited by: RetroRiceRocketRider, at: 2006/07/04 13:02
Please Log in or Create an account to join the conversation.
- btchalice
- Offline
- User
Less
More
- Posts: 760
- Thank you received: 7
04 Jul 2006 12:24 #59283
by btchalice
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Replied by btchalice on topic 1981 KZ 650 speedo
got any pics? i have a set from an 82 csr750
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Please Log in or Create an account to join the conversation.
- JMKZHI
- Offline
- Platinum Member
Less
More
- Posts: 2429
- Thank you received: 48
04 Jul 2006 13:06 - 03 Dec 2008 18:56 #59298
by JMKZHI
Replied by JMKZHI on topic .
del
Last edit: 03 Dec 2008 18:56 by JMKZHI.
Please Log in or Create an account to join the conversation.
- camzaro28
- Topic Author
- Offline
- User
Less
More
- Posts: 2
- Thank you received: 0
05 Jul 2006 18:19 #59565
by camzaro28
Replied by camzaro28 on topic 1981 KZ 650 speedo
all i know is that it is not working. and i told him i would try and find him some options on the net. seems like i have him a few leads.
ill throw this in here too. i guess it is a 4 carb bike? anyway after riding the bike for 20 minutes is starts to cut out and lose power. he says it feels like it is only running on 3 cyl's. anyway he thinks one of the carbs is bad and needs rebuilt, do u think he is on the right track?
thanks again guys. all suggestions appreciated.
ill throw this in here too. i guess it is a 4 carb bike? anyway after riding the bike for 20 minutes is starts to cut out and lose power. he says it feels like it is only running on 3 cyl's. anyway he thinks one of the carbs is bad and needs rebuilt, do u think he is on the right track?
thanks again guys. all suggestions appreciated.
Please Log in or Create an account to join the conversation.
- JMKZHI
- Offline
- Platinum Member
Less
More
- Posts: 2429
- Thank you received: 48
05 Jul 2006 18:37 - 03 Dec 2008 18:58 #59568
by JMKZHI
Replied by JMKZHI on topic .
del
Last edit: 03 Dec 2008 18:58 by JMKZHI.
Please Log in or Create an account to join the conversation.